Panasonic EP1285TL EP1285KL Owner's Manual (English) - Page 9
Install The Armrests On The Unit
View all Panasonic EP1285TL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
English 3 HOW TO MOVE THE UNIT Using the wheels to move the unit • Grasp the legrest to move the unit when using the wheels. • It is easier to move the unit with the massage heads retracted and the backrest in the upright position. *Place a mat or cloth on the floor and move the unit slowly to prevent floor damage. Lifting the Unit • Move the unit by having one person hold the legrest and another person use the handles on the back. *Please hold the handles and legrest securely to avoid dropping the unit as it may damage your floor. Move it slowly Legrest Wheels Place your fingers inside the handle 4 INSTALL THE ARMRESTS ON THE UNIT Front Convex Left Velcro Back Zipper Round hole Front Rear 1 Install the armrests. (Be careful to avoid damaging the coated fabric.) 1 Unfasten the velcro. 2 Unfasten the zipper of the armrest completely. 3 Check the side (right or left) of the armrest. Check the direction (front or back) of the armrest as well. The illustration shows the left armrest. The right armrest is stamped "Front", "Right" and "Back". *The left armrest must be installed on the left hand side of the unit. 4 Align the convex portion of the armrest with the round hole on the unit, and embed the armrest on the unit. Avoid catching the coated fabric between them. If it is caught, pull it out without damaging the fabric. Allen key Lift up Secure with screws 2 Secure the armrests with attachment screws. (Total of 4 positions for a single armrest) Lift the coated fabric on the side of the armrest and insert the attachment screw onto the end of the Allen key, and then tighten. (Tighten the screws in the 4 positions lightly at first, and then tighten all screws firmly.) *If the screw does not enter into the hole, tighten the screw by pushing the armrest from the top. 3 Close the zipper at the bottom side of the armrests. When closing the zipper, be careful not to twist the end of the zipper. 1 Set the zipper. 2 Fasten the zipper. 4 Put both ends of the zipper into the inside. 1 Turn in the edge of the zipper. 2 Fix the sliding tab of the zipper with the velcro.