Panasonic ER-GN70 Operating Instructions - Page 10

English Cleaning Wet cleaning 1. W et the outer blade with water, and apply some hand soap and some water to the outer foil. 2. S lide the power switch to the "O" position, and let it foam for approximately 10 seconds. 3. Turn off the power. ▼ ▼ To clean lightly dirty parts To clean heavily dirty parts • Quick cleaning • Complete cleaning 4. O pen the water inlet (see 4. Slide the power switch to page 12) and turn on the the "I" position. power again. 5. Remove the blades and • If the trimmings box is the trimmings box (see removed, open the water pages 12 and 14) and rinse inlet after attaching the under running water. trimmings box (see page 14). • Cover the drainage outlet of washbasin to prevent the inner blade from flowing away. 5. Pour water through the water inlet at the " " above the " " mark, rinse well and slide the power switch to the "I" position. ▼ ▼ 6. W ipe off water with a towel or similar item, and let it dry naturally. • It will dry faster with the blades and the trimmings box removed (see pages 12 and 14). 10