Panasonic EY6932 EY6932 User Guide - Page 5

-

5

-

7) An extension cord should not be

used unless absolutely necessary.

Use of improper extension cord

could result in a risk of fire and

electric shock. If extension cord

must be used, make sure:

a. that pins on plug of extension

cord are the same number, size

and shape as those of plug on

charger.

b. that extension cord is prop-

erly wired and in good electrical

condition.

c. that wire size is large enough

for ampere rating of charger as

specified below.

RECOMMENDED MINIMUM AWG SIZE OF

EXTENSION CORDS FOR

BATTERY CHARGERS

AC Input Rating.

Amperes

AWG Size of Cord

Equal to or

greater than

But less

than

Length of Cord, Feet

25

50

100 150

0

2

18

18

18

16

8) Do not operate charger with dam-

aged cord or plug

replace them

immediately.

9) Do not operate charger if it has re-

ceived a sharp blow, been dropped,

or otherwise damaged in any way;

take it to a qualified serviceman.

10) Do not disassemble charger; take it

to a qualified serviceman when ser-

vice or repair is required. Incorrect

reassembly may result in a risk of

electric shock or fire.

11) To reduce the risk of electric shock,

unplug charger from outlet before

attempting any maintenance or

cleaning.

12) The charger and battery pack are

specifically designed to work to-

gether. Do not attempt to charge

any other cordless tool or battery

pack with this charger.

13) Do not attempt to charge the battery

pack with any other charger.

14) Do not attempt to disassemble the

battery pack housing.

15) Do not store the tool and battery pack

in locations where the temperature

may reach or exceed 50°C (122°F)

(such a metal tool shed, or a car

in the summer), which can lead to

deterioration of the storage battery.

16) Do not charge battery pack when the

temperature is BELOW 0°C (32°F)

or ABOVE 40°C (104°F). This is very

important.

17) Do not incinerate the battery pack.

It can explode in a fire.

18) Avoid dangerous environment. Do not

use charger in damp or wet locations.

19) The charger is designed to operate

on standard household electrical

power only. Do not attempt to use it

on any other voltage!

20)

Do not abuse cord. Never carry charger

by cord or yank it to disconnect from

outlet. Keep cord away from heat, oil

and sharp edges.

21) Charge the battery pack in a well

ventilated place, do not cover the

charger and battery pack with a

cloth, etc., while charging.

22) Use of an attachment not recom-

mended may result in a risk of fire,

electric shock, or injury to persons.

23) Do not short the battery pack. A bat-

tery short can cause a large current

flow, over heating and burns.

24) NOTE: If the supply cord of this ap-

pliance is damaged, it must only be

replaced by a repair shop appointed

by the manufacturer, because special

purpose tools are required.

25) TO REDUCE THE RISK OF ELEC-

TRIC SHOCK, THIS APPLIANCE

HAS A POLARIZED PLUG (ONE

BLADE IS WIDER THAN THE

OTHER).

This plug will fit in a polarized outlet

only one way. If the plug does not fit

fully in the outlet, reverse the plug. If

it still does not fit, contact a qualified

electrician to install the proper outlet.

Do not change the plug in any way.

Panasonic EY6932 EY6932 User Guide - Page 5

or ABOVE 40°C 104°F. This is very - service

Page 5 highlights