Panasonic EY7410 EY7410 User Guide - Page 7

Battery Low Warning Lamp, Using the LED Light - torque

Get Panasonic EY7410 - DRILL DRIVER 3.6V PDF manuals and user guides View all Panasonic EY7410 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Reference for Adjusting Torque Setting Torque Use 1 Approx: 0.29 N·m (3.0 kgf-cm or 2.6 in-lbs) 5 Approx: 0.82 N·m (8.4 kgf-cm or 7.3 in-lbs) 9 13 Approx: 1.35 N·m (13.8 kgf-cm or 12.0 in-lbs) Approx: 1.88 N·m Fscorredwrsiving (19.2 kgf-cm or 16.6 in-lbs) 17 Approx: 2.41 N·m (24.6 kgf-cm or 21.3 in-lbs) 21 Approx: 2.94 N·m (30.0 kgf-cm or 26.0 in-lbs) For power- Approx: 4.4 N·m ful driving (45.0 kgf-cm or 39.0 in-lbs) screws and drilling ● When using at high speeds, set the clutch at 10 or below. (Operation stops at the maximum torque of 1.5 N·m (15 kgf-cm) when the scale is higher.) ● The auto shut-off function may be­ come inoperable at higher clutch settings when battery power drops. Recharge the battery in that case. NOTE: The chart is only a reference. The torque settings may differ by materials, types of screws, etc. Please test it at your own conditions before use.  Battery Low Warning Lamp tery loses its charge, causing the battery low warning lamp to flash. ● If you notice the battery low warning lamp flashing, charge the battery pack immediately.  Using the LED Light Use the LED light on jobs in dark locations such as attics to illuminate your workspace. CAUTION ● The LED light is intended for use as a supplemental light source. Do not use it as a flashlight. Doing so may result in accident or injury. ● Do not look at the light or shine it directly into your eyes. Continuous exposure to the LED light may damage your eyes. 1. Press and off. to toggle the light on ● To use the light immediately after attaching the battery pack or after the drill has not been used for 5 minutes or more, operate the drill briefly. Off (normal operation) Flashing (No charge) Battery protection feature active Excessive (complete) discharging of Li-ion batteries shortens their service life dramatically. The driver includes a battery protection feature designed to prevent excessive discharging of the battery pack. ● The battery protection feature activates immediately before the bat- -  - ● The light will automatically turn off if the drill is not used for 5 minutes. ● The light uses an extremely small amount of current. Using the light

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
-
7
-
Reference for Adjusting Torque
Setting
Torque
Use
1
Approx: 0.±9 N
·
m
(3.0 k
g
f-cm or ±.6 in-lbs)
For driving
screws
5
Approx: 0.8± N
·
m
(8.4 k
g
f-cm or 7.3 in-lbs)
9
Approx: 1.35 N
·
m
(13.8 k
g
f-cm or 1±.0 in-lbs)
13
Approx: 1.88 N
·
m
(19.± k
g
f-cm or 16.6 in-lbs)
17
Approx: ±.41 N
·
m
(±4.6 k
g
f-cm or ±1.3 in-lbs)
±1
Approx: ±.94 N
·
m
(30.0 k
g
f-cm or ±6.0 in-lbs)
Approx: 4.4 N
·
m
(45.0 k
g
f-cm or 39.0 in-lbs)
For power-
ful driving
screws and
drilling
●
When using at high speeds, set the
clutch at 10 or below. (Operation
stops at the maximum torque of 1.5
N·m (15 k
g
f-cm) when the scale is
higher.)
●
The auto shut-off function may be-
come inoperable at higher clutch
settings when battery power drops.
Recharge the battery in that case.
NOTE:
The chart is only a reference. The
torque settings may differ by materi-
als, types of screws, etc. Please test
it at your own conditions before use.
Battery Low Warning Lamp
<Battery low warning lamp>
Off
(normal
operation)
Flashing
(No charge)
Battery
protection
feature active
Excessive (complete) discharging of
Li-ion batteries shortens their service
life dramatically. The driver includes a
battery protection feature designed to
prevent excessive discharging of the
battery pack.
● The battery protection feature acti
-
vates immediately before the bat-
tery loses its charge, causing the
battery low warning lamp to flash.
● If you notice the battery low warn
-
ing lamp flashing, charge the bat-
tery pack immediately.
Using the LED Light
Use the LED light on jobs in dark
locations such as attics to illuminate
your workspace.
CAUTION
● The LED light is intended for use as
a supplemental light source. Do not
use it as a flashlight.
Doing so may result in accident or
injury.
● Do not look at the light or shine it
directly into your eyes.
Continuous exposure to the LED
light may damage your eyes.
1. Press
to toggle the light on
and off.
● To use the light immediately after
attaching the battery pack or after
the drill has not been used for 5
minutes or more, operate the drill
briefly.
●
The light will automatically turn
off if the drill is not used for 5
minutes.
●
The light uses an extremely small
amount of current. Using the light