Panasonic EYFEA1N EYFEA1N User Guide - Page 14
Maintenance, Viii., Accessories, Appendix, Specifications
View all Panasonic EYFEA1N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
[Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. VII. MAINTENANCE Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, benzine, or other volatile solvents for cleaning. In the event that the inside of the tool or battery pack is exposed to water, drain and allow to dry as soon as possible. Carefully remove any dust or iron filings that collect inside the tool. If you experience any problems operating the tool, please contact your nearest authorised service center. VIII. ACCESSORIES Use only bits suitable for size of drill's chuck. IX. APPENDIX MAXIMUM RECOMMENDED CAPACITIES Model EYFEA1N Screw driving Machine screw Low : M5 High : M4 X. SPECIFICATIONS MAIN UNIT Model EYFEA1N Motor voltage No load speed Low High 7.2 V DC 0 - 300 min-1 (rpm) 0 - 900 min-1 (rpm) Maximum Low torque High 6.0 N·m (61 kgf-cm, 53.24 in-lbs) 2.0 N·m (20 kgf-cm, 17.75 in-lbs) Clutch torque Approx. 0.3 N·m (3 kgf-cm, 2.6 in-lbs) - 4.0 N·m (41 kgf-cm, 35.6 in-lbs) Overall length 145 mm (5-7/10") Weight (with battery pack) 0.63 kg (1.39 lbs) - 14 -