Panasonic F85S DVDF85 User Guide - Page 22

Advanced operations Changing settings Speaker setting For analog connection (➜ page 7) Change speaker presence and size a, delay time b, and channel balance c to suit the speakers you have connected when you select "Multi-channel" (3 or more speakers are connected). Front (L) a Center b a c Front (R) a SETUP Exit Test signal SELECT ENTER RETURN L ms C dB R 0 0 Exit Test dB SW 0 LS d B 0 m s 0 d B 0 RS (LS) - Surround - (RS) a c b c a Subwoofer c a Speaker presence and size (a) 1. Press [3, 4, 2, 1] to select the item and press [ENTER]. 2. Press [3, 4] to select the setting and press [ENTER]. Icon examples: Surround speaker (LS) LS LS Large Small No ≥Large:When the speaker supports low-frequency (under 100 Hz) reproduction. ≥Small:Select when the speaker does not support low-frequency reproduction. If the subwoofer is set to "No", the front speakers will automatically be set to "Large". Channel balance (c) 1. Press [3, 4, 2, 1] to select "Test" and press [ENTER]. A test signal is output from one speaker at a time, starting with the front left speaker and proceeding clockwise. Front (L)_-)Center_-)Front (R) : ; Surround (LS)(-----=Surround (RS) 2. While listening to the test signal, press [3, 4] to adjust the volume of the center and surround speakers so they are the same apparent volume as the front speakers (s6 to r6). (The front speakers cannot be adjusted here.) 3. Press [ENTER]. The test signal stops. ≥No signal is output for the subwoofer. To adjust its volume, play something, then return to this screen to adjust to suit your taste. To finish the speaker setting Press [3, 4, 2, 1] to select "Exit" and press [ENTER]. [Note] The unit may be unable to output as set here due to limitations imposed by the unit itself or the disc being played. (The display's "D.MIX" indicator goes out in these cases.) Delay time (b) (Effective when playing multi-channel discs) For optimum listening with 5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If you have to place the center or surround speakers closer to the seating position, adjust the delay time to make up for the difference. L C R de SW f LS RS d Center speaker Difference Approx. 50 cm (11⁄2 feet) Approx. 100 cm (3 feet) Approx. 150 cm (5 feet) Approx. 200 cm (6 feet) f Surround speakers Difference Approx. 200 cm (6 feet) Approx. 400 cm (12 feet) Approx. 600 cm (18 feet) Setting 1.3 ms 2.6 ms 3.9 ms 5.3 ms Setting 5.3 ms 10.6 ms 15.9 ms If distances d (from the center speaker) and f (from the surround speakers) are the same as or greater than e (from the front speakers), leave the delay time as "0", the factory preset. If either distance d or f is less than e, find the difference in the relevant table and change to the recommended setting. Changing the delay time 1. Press [3, 4, 2, 1] to select the delay time box and press [ENTER]. 2. Press [3, 4] to adjust the delay time and press [ENTER]. RQT6977 22