Panasonic FV15VQL4 Installation Instructions - Page 9
Installation, Joist, Mounting, Continued
View all Panasonic FV15VQL4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
INSTALLATION 11 ( JOIST MOUNTING-II ) CONTINUED 4. Insert the suspension bracket into fan body (refering to step 2 of installation I, page 6) 5. Insert the fan body into joists. (Fig.9) IMPORTANT: Make sure that adaptor claws are properly inserted into body slots. 6. Secure the fan body to adaptor by using thumb screw and plug connector to receptacle(Fig.10) 7. Secure the suspension bracket to joists by using long screws (ST4.2X20) and secure it to fan body by using screw II (ST4.2X12) in vertical direction. (Fig.11) 8. Follow step 8 to 11 of installation I (page 8) to complete the installation work. When mounting body and blower separately 3 Screws Adaptor 1. Loosen 3 screws (but do not remove them from blower). (Fig.12-1) Joist Conduit Junction box cover Duct tape or clamps Circular duct 0 1 Fan body Slots Adaptor claws 2. Remove blower section. (Fig.12-2) Fig.12-1 3. Remove adaptor from fan body and secure it to joists as in Fig.8 of page 8. 4. Insert fan body (without blower section) into joists Fan body (Fig.9) 5. Secure the adaptor to fan body by using thumb screw. (Fig.10) Fan body e 6. Secure the fan body to joists by using long screw V'q (ST4.2X20). (Fig.11) 7. Insert the blower into the fan body. (Fig.12-3) Blower Fig.12-2 a Joist Fig.12-3 8. Secure the blower. (Fig.12-4) and plug connector to receptacle (Fig.10) 3 Screws Screw driver Fig.12-4 Fig. 9 Thumb Plug connector I Receptacle I screw Fig. 10 screw II (ST4.2X12) 2 Long screws (ST4.2X20) Joist Fig. 11 9