Panasonic H1 Hd Video Camera - Multi Language - Page 12
Quick Guide - battery charger
UPC - 092281893006
View all Panasonic H1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Quick Guide ∫ Charging the battery ∫ Inserting/removing an SD card Charging lamp [CHARGE] A Lights up: Charging Goes off: Charging completed 1) Connect the AC cable to the AC adaptor and the AC outlet. 2) Insert the battery into the battery charger by aligning the arrows. ∫ Inserting the battery Install the battery by inserting it in the direction shown in the figure. A Insert the battery until it clicks and locks. ∫ How to turn on the power Turn on the power by turning the mode dial to or while pressing the lock release button A. ≥ Rotate the mode dial while at the same time pressing in the lock release button if changing from OFF to another mode. ≥ Status indicator B ≥ Align with the mark C. ≥ To turn off the power, set the mode dial to OFF. Card access lamp [ACCESS] A ≥ When this unit is accessing the card, the access lamp lights up. 1) Open the LCD monitor. ≥ Check that the card access lamp has gone off. 2) Open the SD card cover by sliding the OPEN lever B. 3) Insert/remove the SD card. ≥ When inserting an SD card, face the label side C in the direction shown in the illustration and press it straight in as far as it will go. ≥ When removing the SD card, press the center of the SD card and then pull it straight out. 4) Securely close the SD card cover. ≥ Securely close it until it clicks. 12 VQT1T64