Panasonic HC-V270 Owners Manual - Page 117

Using [Link to Cell] with a wireless access point connection ∫ If the device is Android (NFC-compatible) ≥ Set the NFC function of the smartphone to on. 1 Connect the smartphone to a wireless access point. ≥ When you connect using NFC for the first time, please make connection of this unit and a wireless access point. (l 145) 2 Start up the smartphone application "Image App". 3 Touch the smartphone on of this unit. ≥ Touch the NFC touch area when the NFC mark is displayed on the smartphone screen. ≥ If this is the first time the smartphone is connecting to this unit, touch [YES] on the screen of this unit, and then touch the smartphone on of this unit again. ≥ If the unit is not recognized even when touching the smartphone, change positions and try again. ≥ The connection cannot be established while this unit is recording. ≥ When the connection is complete, images of this unit is displayed on the smartphone screen. ≥ This unit is turned on even if it touches the smartphone on of this unit, where this unit is turned off with a LCD monitor. If you touch the second smartphone when this unit has already been connected to the first one The remote operation with the first smartphone that has been connected to this unit will be cut off, and the newly touched smartphone will be connected. ≥ The connection cannot be established while this unit is recording or copying a file to the smartphone during remote operations. ∫ If the device is Android (non-NFC-compatible) or iOS 1 Connect the smartphone to a wireless access point. 2 Press Wi-Fi button on this unit and touch [Link to Cell]. ≥ It will go into connection standby for remote operation. 3 Start up the smartphone application "Image App". ≥ When the connection is complete, images of this unit is displayed on the smartphone screen. To exit [Link to Cell]: Touch [EXIT] or press Wi-Fi button. ≥ The message is displayed. Touch [YES] to close the indication. - 117 -