Panasonic HC-V270 Owners Manual - Page 154

[Start up using NFC] [ON]/[OFF] This item allows you to use NFC to turn on this unit, establish a remote connection, and configure the home monitoring settings. [Home Monitor Connect] Please refer to page 128. [ECONOMY (Wi-Fi)] [ON]/[OFF] If you set [ON], the LCD monitor turns off when remotely operating this unit with a smartphone (in Motion Picture Recording Mode or Still Picture Recording Mode) so that power consumption is reduced. ≥ When the LCD monitor is turned off, you can display the screen by touching it. ≥ If the Wi-Fi connection is turned off, this unit will turn off automatically approximately 15 minutes later. [Menu Password] [Setup]/[Delete] This will set/clear the Password to limit the startup of the Wi-Fi setting menu. By setting the Password, it will prevent erroneous operation, prevent wrongful use of the Wi-Fi function by third party, and protect the set personal information. 1 Touch [Setup]. 2 Touch [INPUT], and enter the Password (6 characters). ≥ After finish entering the Password, touch [Enter]. ≥ If the Password has already been set, is displayed. ≥ For details on how to enter characters, refer to page 80. 3 Touch [NEXT]. 4 Touch [INPUT], and enter the same Password again. ≥ After finish entering the Password, touch [Enter]. ≥ If the Passwords match with each other, a message is displayed. 5 Touch [EXIT]. ≥ If you set the Wi-Fi Password, you will need to enter the Password each time you touch [Wi-Fi Setup] on the Wi-Fi home screen. ≥ When you forget your Wi-Fi Password, perform [Reset Wi-Fi Settings] from the Setup menu. This will set the Wi-Fi setting to the condition at the time of purchase, and you will be able to use the Wi-Fi setting menu. (l 34) - 154 -