Panasonic HC-VX870K Advanced Operating Manual - Page 182

[WPS Connection] 1 Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. 2 Touch [Direct Connection]. 3 Touch [Change connection type]. 4 Touch [WPS Connection]. 5 Set the smartphone to WPS Mode. Confirming that the Wi-Fi connection is complete j The status indicator of this unit is lit green j is displayed on the screen Connecting with QR code 1 Press Wi-Fi button on this unit and touch [Wi-Fi Setup]. 2 Touch [Direct Connection]. 3 Touch [Change connection type]. 4 Touch [QR code]. ≥ QR code is displayed on the screen of this unit. 5 Start up the smartphone application "Image App". 6 On the smartphone, select [QR code], and scan the QR code displayed on the screen of this unit. ≥ When using an Android device, the smartphone and this unit are connected directly, allowing you to use remote operations. (l 147) ≥ When using an iOS device, perform the following operations: 1 Select the option that allows you to install the app on the profile screen of the "Image App", and follow the on-screen instructions to complete the installation. 2 Press the home button to close the displayed screen. 3 Select the network name (SSID) of this unit from the Wi-Fi setup of the smartphone. ≥ When the QR code cannot be scanned, refer to "Connecting by entering an SSID and Password". Confirming that the Wi-Fi connection is complete j The status indicator of this unit is lit green j is displayed on the screen - 182 -