Panasonic HCV100 HCV100 User Guide - Page 13

Quick Guide

Page 13 highlights

Quick Guide ∫ Inserting the battery Install the battery by inserting it in the direction shown in the figure. ∫ Inserting/removing an SD card ≥ Insert the battery until it clicks and locks. ∫ Charging the battery      Access lamp [ACCESS] A ≥ When this unit is accessing the SD card or built-in memory, the access lamp lights up. A DC input terminal 1 Connect the AC cable to the AC adaptor, then the AC outlet. 2 Connect the AC adaptor to the DC input terminal [DC IN]. ≥ The status indicator will flash red for approx. 2 seconds (off for approx. 1 second, on for approx. 1 second), indicating that charging has begun. It will turn off when the charging is completed. ≥ Check that the access lamp has gone off. 1) Open the SD card cover and insert/ remove the SD card into/from the card slot B. ≥ Face the label side C in the direction shown in the illustration and press it straight in as far as it will go. ≥ Press the center of the SD card and then pull it straight out. 2) Securely close the SD card cover. ≥ Securely close it until it clicks. 13 VQT3Y04

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

13
VQT3Y04
Inserting the battery
Install the battery by inserting it in the
direction shown in the figure.
Insert the battery until it clicks and locks.
Charging the battery
A
DC input terminal
1
Connect the AC cable to the AC
adaptor, then the AC outlet.
2
Connect the AC adaptor to the DC input
terminal [DC IN].
The status indicator will flash red
for
approx. 2 seconds (off for approx. 1 second, on
for approx. 1 second),
indicating that
charging has begun.
It will turn off when the charging is
completed.
Inserting/removing an SD card
Check that the access lamp has gone off.
1)
Open the SD card cover and insert/
remove the SD card into/from the card
slot
B
.
Face the label side
C
in the direction
shown in the illustration and press it
straight in as far as it will go.
Press the center of the SD card and then
pull it straight out.
2)
Securely close the SD card cover.
Securely close it until it clicks.
Quick Guide
Access lamp [ACCESS]
A
When this unit is accessing the SD
card or built-in memory, the access
lamp lights up.