Panasonic HCV100 HCV100 User Guide - Page 42
ECONOMY AC], QUICK START], Set [QUICK START] to [ON]., Close the LCD monitor.
View all Panasonic HCV100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
[ECONOMY (AC)] [ON]/[OFF] When about 30 minutes have passed without any operation while connecting the AC adaptor with this unit, the unit automatically turns off. ≥ This unit will not automatically turn off even if the [ECONOMY (AC)] is set to [ON] in following cases: j Using the USB cable for PC etc. j PRE-REC is used j During playback of the slide show [QUICK START] [ON]/[OFF] This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened. ≥ When in Quick Start Standby Mode about 40% of the power used in Recording pause mode is being consumed, so the recording time will be reduced. ≥ Quick Start will not work if there is no SD card inserted. ≥ Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there is no SD card inserted. ≥ Change the mode to . 1 Set [QUICK START] to [ON]. 2 Close the LCD monitor. The status indicator A flashes green and the unit goes into Quick Start Standby Mode. 3 Open the LCD monitor. The status indicator A lights red and the unit is put into recording pause. ≥ Quick Start Standby Mode is canceled if j about 5 minutes have elapsed j mode is set to ≥ It may take some time for Automatic White Balance to adjust. ≥ In the Quick Start Mode, the zoom magnification becomes approx. 1k. ≥ When it has gone into Quick Start Standby Mode automatically with the [ECONOMY (BATT)] (l 41)/[ECONOMY (AC)], close the LCD monitor once and open it again. ≥ Turn the unit off using the power button. 42 VQT3Y04