Panasonic HDC SD5 Hd Sd Camcorder - Multi Language - Page 32
Quick start
UPC - 037988831883
View all Panasonic HDC SD5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Setup Quick start When quick start is ON the battery power is still being consumed, even when the LCD monitor is closed. This unit will resume recording/pause mode about 1.7 seconds after the LCD monitor is reopened. ≥ When in quick start standby mode about 70% of the power used in recording pause mode is being consumed, so the recording time will be reduced. ¬ Rotate the mode dial to select and insert an SD card in this unit. 1 Press the MENU button, then select [SETUP] # [QUICK START] # [ON] and press the cursor button. 2 Close the LCD monitor while the mode dial is set to . A The status indicator A flashes green and the unit goes into quick start standby mode. ≥ The lens cover does not close. 3 Open the LCD monitor. A The status indicator A lights red and the unit is put into recording pause approx. 1.7 seconds after it is turned on. ª To cancel Quick start Press the MENU button, then select [SETUP] # [QUICK START] # [OFF] and press the cursor button. ≥ The status indicator goes off, the lens cover closes and the power turns off if the mode dial is set to OFF while the unit is in quick start standby mode. ≥ The status indicator goes off and the power turns off if quick start standby mode continues for approx. 5 minutes. ≥ Quick start standby mode is canceled if jthe mode dial is switched jthe battery is removed or the AC adaptor is disconnected ≥ In the quick start mode it may take some time for automatic white balance to adjust, if the scene being recorded has a light source different from the scene last recorded. (When the MagicPix function is used, however, the white balance of the scene last recorded is retained.) ≥ In the quick start mode, the zoom magnification becomes 1k and the picture size may differ from what it was before quick start standby mode. ≥ If [POWER SAVE] (l 109) is set to [5 MINUTES] and the unit automatically goes into quick start standby mode, close the LCD monitor and then open it again. 32 VQT1H62