Panasonic HDCSD800 HDCSD800 User Guide - Page 126
Connecting to a PC
View all Panasonic HDCSD800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
With a PC Connecting to a PC ≥ Connect this unit to the PC after the software applications are installed. ≥ Remove the supplied CD-ROM from your PC. A USB cable (supplied) ≥ Insert the plugs as far as they will go. 1 Connect this unit to the AC adaptor. ≥ It is possible to use the unit connected to the PC with the batteries only, but you will not be able to write data into the unit. Use the AC adaptor to free you from worrying about the battery running down. ≥ Connect with the AC adaptor when using the Conversion Assist Function. 2 Turn on the unit. ≥ This function is available in all modes. 3 Connect this unit to a PC. ≥ The USB function selection screen will appear. 4 Touch [PC] on the screen of this unit. ≥ The Smart Wizard Screen is automatically displayed when HD Writer AE 3.0 is installed. ≥ This unit is automatically recognized as an external drive of the PC. (l 128) ≥ When you select an option other than [PC], reconnect the USB cable. ≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn the LCD monitor on. 126 VQT3K35