Panasonic HDCSD90 HDCSD90 User Guide - Page 30

Basic Recording motion pictures 1 Change the mode to .  2 Open the LCD monitor. T 3 Press the recording start/stop W button to start recording.  A When you begin recording, ; changes to ¥. B Recording button icon ≥ Recording can also be started/stopped by touching the Recording button icon. This icon functions in the same manner as the recording start/stop button. 4 Press the recording start/stop button again to pause recording. ∫ Screen indications in the Motion Picture Recording Mode 0h00m00s R 1h20m ≥ Screen display will disappear when no function is performed for a specific period of time. To display it again, touch the screen. (It is not displayed when the AF/AE tracking is set.) A Recording mode B Recording time elapsed Each time the unit is put into recording pause, the counter display will be reset to 0h00m00s. ("h" is an abbreviation for hour, "m" for minute and "s" for second.) C Approximate remaining recordable time (When the remaining time is less than 1 minute, R 0h00m flashes red.) ≥ There are 3 recording formats that can be used with this unit: AVCHD that records high-definition motion pictures, 1080/60p that records motion pictures in maximum quality for this unit and iFrame that records motion pictures suitable for playback and editing on Mac (iMovie'11). To change the recording format, change the Recording Mode (l 60) or press and hold the 1080/60p button. (l 49) ≥ Still pictures can be recorded while recording the motion picture. (l 33) 30 VQT3J56