Panasonic HMC70 Memory Card Camera Recorder - Page 23
Installing the lens hood, Tripod receptacle, Lens Hood Piece - filter
UPC - 791871303429
View all Panasonic HMC70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Before using Tripod receptacle The tripod receptacle is a hole used to mount a tripod for the unit. (For details on mounting the tripod, refer to the operating instructions for the tripod.) ≥Responsible for the ISO 1222 (1/4 inch) ≥The tripod mounting hole is 5.5 mm deep. Do not force the tripod screw beyond this depth.You can damage the camera-recorder if you use any screw other than 1/4-20UNC. Lens Hood Piece ª Installing the lens hood Tighten (loosen) the lens hood screw A to install (remove) the lens hood. ª Installing the lens hood piece Rotate the lens hood piece counter-clockwise A to remove it. In order to attach it, place into slot B, and then rotate it clockwise C. A Camera base B Screw for mounting the unit C Tripod pin ≥You can perform operations easily using the remote control when the tripod is used. (l 25) ≥Install the ND filter or the MC protector of the Filter kit VW-LF43N (optional) on the front side of the lens hood piece. Do not install anything else (except for the lens cap). (For details, refer to the operation manual of the filter kit.) ≥Install the tele-conversion lens VW-T4314H (optional) or the wide-conversion lens VW-W4307H (optional) after removing the lens hood piece. (Do not install it on the front side of the lens hood piece.) (For details, refer to the operation manual of the tele-conversion lens/ wide-conversion lens.) ≥It is possible to install the ND filter and the tele-conversion lens one over the other. However, when the zoom is set to W, four corners on the screen may be darker (vignetting), thus it is not recommended. 23