Panasonic HPX170 Operating Instructions - Page 124
Appendix, Selecting the USER CLIP NAME, recording method
UPC - 791871304266
View all Panasonic HPX170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Appendix Selecting the USER CLIP NAME recording method Press the MENU button and select META DATA PROPERTY USER CLIP NAMEto select the recording method. Two options are available: TYPE1and TYPE2. TYPE1 USER CLIP NAME to be recorded If clip metadata has been read in Uploaded data If no clip metadata has been read in or if the setting for recording clip metadata has been turned off Same as GLOBAL CLIP ID (UMID data) TYPE2 If clip metadata has been read in If no clip metadata has been read in or if the setting for recording clip metadata has been turned off USER CLIP NAME to be recorded Uploaded data + COUNT value* Same as CLIP NAME * The COUNT value is indicated as a four-digit number. The COUNT value is incremented each time a new clip is captured if clip metadata has been read in and TYPE2 has been selected as the recording method. The COUNT value can be reset using the following procedure. Press the MENU button and select META DATA PROPERTY USER CLIP NAME to display the menu shown below. Select "COUNT RESET" with the cursor and press the Operation lever to reset the COUNT value to 1. When a P2 card with a memory capacity of 8 GB or more is used in this unit and a one-time continuous recording exceeds the prescribed duration (approx. 5 minutes for DVCPRO HD, approx. 10 minutes for DVCPRO50 or approx. 20 minutes for DVCPRO or DV) or when a onetime recording extends over more than one P2 card, the recording concerned will automatically be undertaken as a separate clip. At this time, each clip will be provided with its own COUNT value. Example of recording (DVCPRO50) a clip on one P2 card: REC start (recording start) REC/PAUSE (recording pause) Recording duration = Approx. 15 min. Clip 1 Clip 2 COUNT value = 0001 COUNT value = 0002 10 min. 5 min. Example of recording a clip on two P2 cards: REC start (recording start) REC/PAUSE (recording pause) Clip 1 Clip 2 COUNT value = 0003 COUNT value = 0004 1st card 2nd card If the clip thumbnails are displayed as shown in the example above or their properties are indicated using a P2 device, the thumbnail and COUNT value of clip 1 will be displayed. 124