Panasonic HPX170 Operating Instructions - Page 16
Installing and removing the power supply, Connecting and disconnecting the power cord, Installation - with adapter
UPC - 791871304266
View all Panasonic HPX170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Installing and removing the power supply Installing and removing the battery Installation 1 Insert the battery until it clicks into place. Removal 1 Set the POWER switch to OFF, and check that the mode lamp is off. 2 While pressing the battery release button, raise up the battery to remove it. • Support the battery with your hand to ensure that it will not fall. Mode lamp Connecting and disconnecting the power cord Battery release button Installation 1 Connect the DC cord to the AC adapter. 2 Plug the AC power supply cord into the power outlet. 3 Slide the DC cord's battery connector to the direction of the arrow until it clicks into place. 2 Slide the DC cord's battery connector to the direction of the arrow while pressing the battery release button. Battery release button DC cord's battery connector Removal 1 Set the POWER switch to OFF, and check that the mode lamp is off. 16 3 Disconnect the AC power supply cord from the power outlet. CAUTION: This apparatus can be operated at a voltage in the range of 110 - 240 V AC. Voltages other than 120 V are not intended for U.S.A. and Canada. Operation at a voltage other than 120 V AC may require the use of a different AC plug. Please contact either a local or foreign Panasonic authorized service center for assistance in selecting an alternate AC plug.