Panasonic HX-A1M Basic Owners Manual - Page 21
Attaching this unit to a Multi Mount or, Tripod Mount
View all Panasonic HX-A1M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Preparation Attaching this unit to a Multi Mount or Tripod Mount You can attach this unit to a Multi Mount or Tripod Mount and perform recording. ≥ When the Tripod Mount is attached to a tripod or similar item, do not hold this unit or adjustment belt to carry the assembled items. ≥ It may not be possible to attach a Multi Mount to a helmet or other object, depending on its shape. ≥ When the adjustment belt becomes too loose to hold this unit in position, stop the use of the Multi Mount or Tripod Mount. ≥ Do not touch the lens while attaching or removing parts. ≥ Do not hold this unit or adjustment belt to carry the assembled items. Using a Multi Mount Attaching to a helmet, etc. Attach the Multi Mount to a smooth surface, such as a helmet. Note the following points so that the Multi Mount will achieve an optimal adhesion strength: ≥ Avoid high or low temperatures and high humidity, and do the attachment work indoors. ≥ Attach the Multi Mount at least 24 hours before use. (Adhesion is optimized after a period of at least 24 hours in the environment above.) ≥ Before attaching the Multi Mount, remove the hook and loop fastener and the band from the Multi Mount. 1 Peel off one side of the double sided tape, and attach it to the smoother side of the fastener that has a harder texture (hook fastener). 2 Peel off the other side of the double sided tape, and attach the hook fastener to a location where the Multi Mount will be attached to. ≥ Dust, etc. adhering to the contact surface will weaken the adhesion. Before attaching the double sided tape, remove the dust, etc., and wipe with a dry cloth. ≥ The double sided tape is not peelable. Taking account of the height, width, etc. of the Multi Mount attached to this unit, attach the tape to a location where it will not come in contact with a helmet shield, etc. 3 Pass the fastener that has a softer texture (loop fastener) through the Multi Mount so that the soft fabric side will face down. 21 (ENG) SQT0885