Panasonic KV-S2045C Service Manual - Page 61
Function item list of Service Utility - updates
View all Panasonic KV-S2045C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
9.2. Function item list of Service Utility KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series Item Purpose Scanner Status *2 To indicate scanner status. (Ready or Error or Warning) Scanner Information *2 To indicate scanner information about Product ID, firmware version, board revision, SCSI condition (ID No., Terminator), and so on. Scanner Counter Update All Counter *2 To update counter values of System Counter, Cleaning roller Counter, and Replacing roller Counter. Clear Counter for cleaning roller *2 To clear Counter for cleaning roller to zero after cleaning roller. Clear Counter for replacing roller *2 To clear Counter for replacing roller to zero after replacing roller. Scanner Condition Sleep Mode *2 To set waiting time before entering to the sleep mode. Clean Imprinter *1, *2 To clean an ink jet head of imprinter. Warning Setting To set warning timing to clean roller and to replace roller. Set Default To set "sleep mode setting" and "warning timing to clean and to replace roller" to the default. Test LED To light LED on the front panel with colors changing periodically (Green - Orange - Red - Green -....) Key / Sensor To do Key or Sensor ON / OFF test. Sensor Sensitive Level To check sensitive level of each Sensor. (Waiting, Starting Position, Ending) Feed Motor To check Paper Feed Motor's rotating. Conveyor Motor To check Conveyor Motor's rotating. Feed To check paper feed condition. Sleep Mode To check whether sleep mode function works properly. CIS LED Level To check peak output level after setting CIS LED lighting level each side. CIS Black Level To check black level after setting black off-set level each side. Memory To execute memory R/W test. Adjust Shading To execute shading correction. All Position To adjust scanning length, vertical, and horizontal positions for front and back sides automatically. Individual Position 1. To execute automatic length, vertical or horizontal position adjustment for front and back sides, individually. Other Save Information *2 2. To adjust scanning length, vertical, or horizontal position for front and back sides manually. To save scanner and PC information. Remarks 2 2 1 1 1 1 6 3 3 5 5 5 5 5 5 5 5 5 5 4 4 4 1 Note *1: This item is available only when the optional Imprinter is installed. (KV-S2045C/SU245C Series only) *2: These items are included in User Utility software. Remarks 1. Parameter setting by user 2. Status indication 3. Parameter setting by service person 4. Adjustment 5. Diagnosis 6. Maintenance 61