Panasonic KX-HN3001W Operating Instructions - Page 17
Confirming the usage area, Testing the baby monitor system, Testing the motion detection, range
View all Panasonic KX-HN3001W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Item Meaning Timer is set to "Once". (page 28) Timer is set to "Repeat". (page 28) Lullaby is set. (page 21) Displays the temperature detected by the temperature sensor. (page 20) Auto scan (page 21) The monitor unit is talking to the camera unit. (page 19) Camera zoom is on. (page 19) Displayed when motion is detected. (page 27) Displayed when sound is detected. (page 27) *1 2 beeps sound from the monitor unit when the camera unit is out of the service area. *2 The number displayed in the icon changes depending on the number of the connected camera unit. Confirming the usage area Wireless communication range The wireless communication range of the monitor unit from the camera unit is approximately 457.5 m (1500 feet). Wireless communication may be unreliable when the following obstacles are located between the monitor unit and camera unit. R Metal doors or screens R Walls containing aluminum-sheet insulation R Walls made of concrete or corrugated iron R Double-pane glass windows R Multiple walls R When using the monitor unit and camera unit on separate floors or in different buildings Getting Started Note: R is displayed on the monitor unit when the camera unit is out of range. Usage area cautions Using the monitor unit in the following areas may cause deformation, malfunction, or operational failure. R In direct sunlight R Areas exposed to grease or steam, such as kitchens R Near fire or heating devices R Near magnetic fields (such as near microwaves and magnets) R Areas subject to extreme temperature changes, such as next to air conditioners R Areas with reflective objects, such as glass, that can interfere with detection of temperature variation R Areas where the temperature is affected by strong illuminating objects (such as fluorescent lights) R Near devices that emit strong radio waves, such as mobile phones Testing the baby monitor system Before using your baby monitor system, you should perform a test run to ensure that the system is configured correctly. For example, test the motion sensor, microphone, and speaker. Testing the motion detection range After setting up the camera unit and monitor unit, you can use your monitor unit to test the performance of the camera unit's motion detection feature. 1 Move to an area within the camera unit's viewable area. 2 While moving near the camera unit, use your monitor unit to observe where you For assistance, please visit http://shop.panasonic.com/support 17 HN3001_(en_en)_0110_ver.410.pdf 17 2018/01/10 11:43:21