Panasonic KX-HN3001W Operating Instructions - Page 19
Baby monitor, Viewing live camera images, Listening/talking to the, camera unit
View all Panasonic KX-HN3001W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Using the Baby Monitor Baby monitor The baby monitor system allows you to listen and view images on a monitor unit from a room where the camera unit is located. With the use of smart features (page 25), the monitor unit notifies you when the camera unit's sensors are triggered, and you can also play lullabies from the camera unit. Important: R You should perform a test run of the baby monitor system before using it (page 17). R The baby monitor system should not be used as a substitute for a medical or caregiver's supervision. It is the caregiver's responsibility to stay close enough to handle any eventuality. Viewing live camera images Images from the camera unit are automatically displayed on the monitor unit when the monitor unit is turned on. Night vision mode The infrared LEDs of the camera unit make it possible to view camera images even when the area surrounding the camera unit is dark. Note: R When night vision mode is active, camera images are displayed in black and white. Adjusting camera images from the monitor unit From the monitor unit, you can adjust the area viewed by the camera unit by using the pan/tilt. While viewing images from the camera unit, press MFN or MEN to adjust the pan range and MCN or MDN to adjust the tilt range. Note: R The sound sensor and motion sensor do not function during and for 5 seconds after pan/tilt operations. R Only adjust the pan/tilt with operations from the monitor unit. Do not adjust the pan/tilt of the camera unit by hand. Camera zoom The camera zoom can be used to zoom in on images displayed on the monitor unit. 1 MSMARTN 2 MCN: Select the desired setting. a MMENUN R The setting is saved and the screen is switched to the selected setting. Listening/talking to the camera unit Listening to the camera unit Sound from the camera unit is heard on the monitor unit while the monitor unit is turned on, and even when it is in sleep mode and images are not displayed. Note: R Sound is not heard on the monitor unit when it is turned off or when it is out of range of the camera unit. R You can adjust the speaker volume of the monitor unit (page 20). Talking to the camera unit While viewing images from the camera unit, press and hold M N on the monitor unit to talk. Release M N to finish talking. Note: R You can adjust the speaker volume of the camera unit (page 20). R Sound from the camera unit will not be heard on the monitor unit while talking. R When pressing M N, make sure to not cover the microphone (page 10) with your fingers. For assistance, please visit http://shop.panasonic.com/support 19 )/@ FO@FO @@WFSQEG