Panasonic KX-HN6002W KX-HNB600: Operating Manual - Page 10

Setup Part names and functions AB C DE F G H I Speaker LED indicator DC jack LINE jack MWi-Fi SETUPN Used when performing initial setup. microSD card slot Used when inserting a microSD card. Remove the label when inserting. M HANDSET/LOCATORN Used when registering a handset. You can also press this button to locate a misplaced handset. M CAMERAN Used when registering a camera. M OTHER DEVICEN Used when registering a sensor or smart plug. LED indicator You can use the LED indicator to confirm the hub's status. Indicator Off Status No power, or LED indicator is turned off*1 Indicator Green, lit Green, blinking Alternating: Green, blinking Yellow, blinking Red, lit Red, blinking quickly Yellow, lit Yellow, blinking Yellow, blinking quickly Status Normal operation, connected to wireless router*1 Registration mode Hub is starting up (cannot be used yet)*2 Security system is armed Security system was triggered Initial setup required Initial setup in progress, mobile device connected Initial setup is starting *1 You can configure the hub so that its LED indicator does not light during normal operation. For more information, refer to the User's Guide (page 15). *2 It may take some time for the hub to finish starting up. Connections Insert the AC adaptor plug firmly into the DC jack. Secure the AC adaptor cord by wrapping it around the hook. Connect the AC adaptor to the power outlet. Insert the telephone line cord into the LINE jack and a single-line telephone jack (RJ11C) until you hear a click. DSL/ADSL service users only: Connect your DSL/ADSL filter (not supplied). Outdoor Camera (KX-HNC600) or Indoor Camera (KX-HNC200) users only: Remove the label covering the card slot and then insert the microSD card (not supplied) into the slot with the notched corner (1) facing upwards (2) until it clicks into place. 10 For assistance, please visit www.panasonic.com/support