Panasonic KX-HN6002W KX-HNB600: Operating Manual - Page 12
Initial setup, Setup
View all Panasonic KX-HN6002W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Setup Compatible mobile devices iPhone® 4 or later, iPad®, or iPad mini™ (iOS 6.0 or later) or an Android™ device (Android 4.0 or later) Note: R The [Home Network] app may not function properly depending on the system environment, such as the model of your mobile device, peripherals connected to your mobile device, and the apps installed on your mobile device. Initial setup Confirm the following before you begin. - Make sure you have installed the [Home Network] app on your mobile device - Make sure your mobile device can connect to the Internet - Make sure the hub and your wireless router are turned on and the hub's LED indicator is lit in yellow - Make sure you know the network name (SSID) and password assigned to your wireless router Initial setup for iPhone, iPad 1 Start the [Home Network] app. 2 Tap [Set up the Hub]. 3 When prompted, press MWi-Fi SETUPN on the hub. R The LED indicator blinks in yellow. 4 Change your mobile device's Wi-Fi setting temporarily so that it connects to the hub directly. R Open your mobile device's [Settings] app, tap [Wi-Fi], select "KX-HNB600", enter "00000000" as the password, and then tap [Join]. R If more than 1 item named "KX-HNB600" is displayed, wait approx. 10 minutes and perform this procedure from the beginning. 5 Start the [Home Network] app again. 6 If necessary, enter the password required to connect to your wireless router and then tap [Next]. R The hub and your mobile device connect to your wireless router. R If prompted, follow the on-screen instructions and connect your mobile device to your wireless router, start the app again, and then tap [Add Mobile Device]. 7 When prompted, press MWi-Fi SETUPN on the hub. R Your mobile device will be registered to the hub. 8 When prompted, follow the on-screen instructions and set the password used to log in to the hub while away from home. 9 Follow the on-screen instructions to finish setting up the hub. R The app's home screen is displayed when initial setup is complete. Initial setup for Android devices 1 Start the [Home Network] app. 2 Tap [Set up the Hub]. 3 When prompted, press MWi-Fi SETUPN on the hub. R The LED indicator blinks in yellow. R The app temporarily changes your mobile device's Wi-Fi setting so that it connects to the hub directly. 4 If necessary, enter the password required to connect to your wireless router and then tap [Next]. R The hub and your mobile device connect to your wireless router. 5 When prompted, press MWi-Fi SETUPN on the hub. R Your mobile device will be registered to the hub. 6 When prompted, follow the on-screen instructions and set the password used to log in to the hub while away from home. R The app's home screen is displayed when initial setup is complete. 12 For assistance, please visit www.panasonic.com/support