Panasonic KX-TA30850 User Manual - Page 30
Station Programming Instructions
View all Panasonic KX-TA30850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
2.1 Station Programming Instructions Station Programming allows you, the proprietary telephone (PT) user, to program certain features from your telephone individually. During the programming mode, your telephone is busy to outside callers. If you want to make a normal call operation, you must finish the programming mode. Programming Mode Display When you enter the Station Programming mode, the display shows the following message as the initial programming mode. PITS-PGM NO? → The display also gives you helpful or stored data information related to the programming steps. In this section, the display example in the programming steps are noted, if required. You can also refer to the "Display Examples" in the Appendix (Section 4). To enter the Station Programming mode PT Be sure the telephone is idle and on-hook. PROGRAM Press PROGRAM. To exit the Station Programming mode PT When the display shows the initial programming mode PROGRAM Press PROGRAM. Programming is completed and the normal call operation resumes. When storing data After pressing the STORE button to store data, you may hear one of the following tones. - Confirmation tone (one beep): storage is completed. - Confirmation tone (two beeps): the data is the same as the last entry. - Alarm tone (three beeps): the entry is not valid. 2-2 Station Programming (Personal Programming)