Panasonic KX-TG1062M Expand Digital Ans Sys - Multi Language - Page 37

Voice Mail Service Voice mail service Voice mail is an automatic answering service offered by your service provider/telephone company. After you subscribe to this service, your service provider/telephone company's voice mail system answers calls for you when you are unavailable to answer the phone or when your line is busy. Messages are recorded by your service provider/telephone company, not your telephone. Please contact your service provider/telephone company for details of this service. Important: L To use the voice mail service provided by your service provider/telephone company rather than the unit's answering system, turn off the answering system (page 31). For details, see page 35. ringing, your unit checks the phone line to see if new voice mail messages have been recorded. Turn this feature off when: - You do not subscribe to voice mail service. - Your service provider/telephone company does not send voice mail tones. - Your phone is connected to a PBX. If you are not sure which setting is required, contact your service provider/telephone company. Turning VM tone detection on/off The default setting is "On". Y Handset 1 {MENU} i {#}{3}{3}{2} 2 {V}/{^}: Select the desired setting. i {SAVE} i {OFF} Voice mail message indication The unit lets you know that you have new voice mail messages in the following ways: - "New Voice Mail" is displayed on the display if message indication service is available. - The message indicator on the handset flashes slowly if message alert feature is turned on ("Message alert"; page 36). To listen to your voice mail messages, you must dial your service provider/telephone company's voice mail access number. Note: L If the base unit or handset still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding {OFF} on the handset until a beep sounds. L If your voice mail service uses voice mail tones and a message is over 3 minutes long, the unit may not indicate new messages. Voice mail (VM) tone detection Your service provider/telephone company sends special signals (sometimes called "voice mail tones" or "stutter tones") to the unit to let you know you have new voice mail messages. If you hear a series of dial tones followed by a continuous dial tone after you lift the corded handset or press {C}, you have new voice mail messages. Soon after you hang up a call or after the phone stops For assistance, please visit http://www.panasonic.com/help 37