Panasonic KX-TG265CSK Operating Instructions - Page 17

Initial settings n Direct command code: Programmable settings can be accessed by pressing MMENUN, # and then the corresponding code on the dial keypad (page 34). Example: Press MMENUN#101. n Symbol meaning: Symbol Example: MbN: "Off" Meaning Press MCN or MDN to select the words in quotations. Important: R When you install the batteries for the first time, the handset may prompt you to set display language and date and time. Perform step 2 in "Display language", page 17, and then press MSELECTN. Continue from step 2 in "Date and time", page 17. Display language You can select either "English" or "Français" as the display language. The default setting is "English". 1 MMENUN#110 2 MbN: Select the desired setting. a MSAVEN 3 MOFFN Date and time 1 MMENUN#101 2 Enter the current month, date, and year by selecting 2 digits for each. Example: July 15, 2012 07 15 12 3 MOKN Getting Started 4 Enter the current hour and minute (12-hour clock format) by selecting 2 digits for each. Example: 9:30 09 30 5 MAM/PMN: Select "AM" or "PM". 6 MSAVEN a MOFFN Note: R When English is selected as the display language, 12-hour clock format is used. When French is selected, 24-hour clock format is used. R The date and time may be incorrect after a power failure. In this case, set the date and time again. Voice guidance language You can select either "English" or "Français" as the voice guidance language of the Talking Call Display and answering system. The default setting is "English". 1 MMENUN#112 2 MbN: Select the desired setting. a MSAVEN 3 MOFFN Dialing mode If you cannot make calls, change this setting according to your telephone line service. The default setting is "Tone". "Tone": For tone dial service. "Pulse": For rotary/pulse dial service. 1 MMENUN#120 2 MbN: Select the desired setting. 3 MSAVEN a MOFFN TG7731_41C_(en-en)_1207_ver.021.17 17 17 2011/12/07 19:53:58