Panasonic KX-TG2740S 2.4 Ghz Cordles Phon - Page 21
Dialing Mode, Set tel line, Save directory, Initial setting, Set dial mode, Pulse
UPC - 037988472970
View all Panasonic KX-TG2740S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Dialing Mode Preparation If you have touch tone service, set to "Tone". If rotary or pulse service is used, set to "Pulse" using either the base unit or handset. Your phone comes from the factory set to "Tone". With the base unit Make sure the base unit is not being used. 1 Press (FUNCTION). 2 Scroll to "Initial setting" by pressing Ö or Ñ, and press á. 3 Scroll to "Set tel line" by pressing Ö or Ñ, and press á. 4 Scroll to "Set dial mode" by pressing Ö or Ñ. 5 Press á. •The current setting is displayed. 6 Select "Pulse" or "Tone" by pressing Ö or Ñ. 7 Press á (Save). •A beep sounds. •To exit the programming mode, press (STOP/EXIT). HSave directory Ringer setting Copy directory HInitial setting Caller ID edit HSet tel line Set answering Line selection HSet dial mode Set flash time Set dial mode :Tone GF H=Save Set dial mode :Pulse GF H=Save Set dial mode :Pulse •You can exit the programming mode any time by pressing (STOP/EXIT). With the handset Make sure the base unit and the handset are not being used. Press (CONF/FUNCTION), and follow steps 2 to 5 Set dial mode of the base unit, using the handset. The display will then show the following. Select "Pulse" or "Tone" by pressing Ö or Ñ, :Tone GF LINE1 LINE2 SAVE and press the right soft key ( SAVE ). •You can exit the programming mode any time by pressing (OFF). For assistance, please call: 1-800-211-PANA(7262) 21