Panasonic KX-TG465CSK Operating Instructions CA - Page 69
Making/answering calls, intercom
View all Panasonic KX-TG465CSK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Useful Information Making/answering calls, intercom Problem is displayed. Noise is heard, sound cuts in and out. The handset or base unit does not ring. I cannot make local calls with the handset or base unit using a cellular line. I cannot make or answer cellular calls with the handset or base unit. I can make and answer cellular calls but cannot hear a sound. I cannot switch cellular calls from the unit to the cellular phone. I cannot make a call using the landline. Cause/solution R The handset is too far from the base unit. Move closer. R The base unit's AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. R The handset is not registered to the base unit. Register it (page 47). R You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. R Move closer to the base unit. R If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. R The ringer volume for landline is turned off. Adjust the ringer volume (page 40). R The ringer volume for cellular line is turned off. Adjust the ringer volume (page 38). R When one handset is selected to ring for cellular calls, other units do not ring. To change the selection, see page 18. R Night mode is turned on. Turn it off (page 44). R You need to add your area code when making cellular calls. Store your area code in order to automatically add it to the beginning of the 7-digit phone number when making cellular calls (page 20). R Depending on the cellular phone's compatibility (page 5), you may not be able to make or answer cellular calls even if the cellular phone is connected to the base unit. R Make sure that the CELL indicator lights up and the cellular phone is connected to the base unit (page 19). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R The cellular phone is being used separately from your system. R The Bluetooth technology on your cellular phone may not be functioning normally. Turn off and on your cellular phone. R Disconnect and reconnect the base unit AC adaptor and try again. R Your cellular phone may not support this feature. Refer to the operating instructions of your cellular phone. R The dialing mode may be set incorrectly. Change the setting (page 16). 69 TGE26x27xC_(en-ca)_0415_ver120.pdf 69 2014/04/15 15:29:32