Panasonic KX-TG585SK KX-TGF37x Owner's Manual - Page 60
Using a Bluetooth wireless headset (optional) for landline calls
View all Panasonic KX-TG585SK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Using Bluetooth® Devices - "Off": Voice announcement is not available as alert. You can configure this setting using either the base unit or one of the handsets. Handset / Base unit 1 For CELL 1: MMENUN#6031 For CELL 2: MMENUN#6032 2 MbN: Select the desired setting. a MSAVEN 3 Proceed with the operation for your unit. Handset: MOFFN Base unit: MEXITN Selecting the alert tone Handset 1 For CELL 1: MMENUN#6041 For CELL 2: MMENUN#6042 2 MbN: Select the desired setting. 3 MSAVEN a MOFFN Temporary alert off You can temporarily disable the alerts by pressing MAPP ALERTSN. Base unit Press MAPP ALERTSN to temporarily disable alerts. R is displayed. R To enable alerts again, press MAPP ALERTSN again. R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line). R For best performance, we recommend using a Bluetooth headset within 1 m (3.3 feet) of the base unit. A headset can communicate with the base unit within a range of approximately 10 m (33 feet). Pairing a headset to the base unit Important: R Make sure that the Bluetooth headset is not connected to any other Bluetooth device. 1 Your headset: Set your headset to pairing mode. R Refer to the headset operating instructions. 2 Handset: MMENUN#621 3 If your headset PIN is "0000", go to step 4. If your headset PIN is other than "0000", press MCLEARN, then enter your headset PIN. R Typically, default PIN is "0000". Refer to the headset operating instructions. 4 Press MOKN, then wait until a long beep sounds. 5 MOFFN R When is displayed on the base unit, the headset is available for use. Using a Bluetooth wireless headset (optional) for landline calls By pairing a Bluetooth headset to the base unit, you can have a hands-free conversation wirelessly for landline calls. Important: R Your Bluetooth wireless headset must support the HeadSet Profile (HSP) specification. R 1 headset can be paired to the base unit. Connecting/disconnecting a headset If you cannot connect the headset and base unit using the headset, you can connect using the handset. To use your headset with another Bluetooth device such as a cellular phone, you may need to disconnect it from the base unit. Important: R Make sure that the headset is turned on. Handset 1 To connect/disconnect: MMENUN#622 60 For assistance, please visit www.panasonic.com/support TGF37x(en)_1128_ver032.pdf 60 2014/11/28 16:08:42