Panasonic KX-TG6533B KXTG6511 User Guide - Page 31

Programming Block calls without phone number You can reject a call without phone number including "Out of area", "Private caller", or "Long distance". 1 {MENU} i {#}{2}{4}{0} 2 {V}/{^}: Select the desired setting. i {SAVE} i {OFF} Viewing/editing/erasing call block numbers 1 {MENU} i {#}{2}{1}{7} 2 {V}/{^}: Select the desired entry. L To exit, press {OFF}. 3 To edit a number: {EDIT} i Edit the phone number. i {SAVE} i {OFF} To erase a number: {ERASE} i {V}/{^}: "Yes" i {SELECT} i {OFF} Note: L When editing, press the desired dial key to add, {CLEAR} to erase. L When viewing, "Block w/o num" is displayed if the block calls without phone number feature is turned on. To turn the feature off: {ERASE} i {V} i {SAVE} i {OFF} Registering a unit Operating additional units Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. 1 Handset: {MENU} i {#}{1}{3}{0} 2 Base unit: ■ KX-TG6511 series: page 3 Press and hold {LOCATOR} for about 5 seconds. (No registration tone) ■ KX-TG6521/KX-TG6531/ KX-TG6541 series: page 3 Press and hold {LOCATOR} for about 5 seconds until the registration tone sounds. L If all registered handsets start ringing, press the same button to stop. Then repeat this step. L The next step must be completed within 90 seconds. 3 Handset: Press {OK}, then wait until a long beep sounds. Note: L While registering, "Base in registering" is displayed on all registered handsets. L When you purchase an additional handset, refer to the additional handset's installation manual for registration. Additional handsets Up to 6 handsets can be registered to the base unit. Important: L See page 6 for information on the available model. For assistance, please visit http://www.panasonic.com/help 31