Panasonic KX-TG785SK Operating Instructions - Page 63
Using a Bluetooth headset (optional
![]() |
View all Panasonic KX-TG785SK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
cellular phone's microphone to operate its voice recognition feature. In this case, disconnect your cellular phone from the base unit. R The compatible voice commands depends on the cellular phone voice recognition feature. Using a Bluetooth headset (optional) By pairing a Bluetooth headset to the base unit, you can enjoy hands-free conversations when talking on landline calls. Important: R Your Bluetooth headset must support the HeadSet Profile (HSP) specification. R Only 1 Bluetooth headset can be paired to the base unit. R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line*1). R For best performance, we recommend using your Bluetooth headset within 1 m (3.3 feet) of the base unit. The base unit can communicate with Bluetooth headsets within an approximately 10 m (33 feet). *1 You cannot use a Bluetooth headset to talk on a cellular line. Pairing a Bluetooth headset to the base unit Important: R Make sure that the Bluetooth headset is not connected to any other Bluetooth device. 1 Bluetooth headset: Set your headset to pairing mode. R Refer to the headset's operating instructions. 2 Handset: MMENUN#621 Using Bluetooth® Devices 3 If your headset PIN is "0000", go to step 4. If your headset PIN is not "0000", press MCLEARN, then enter your headset's PIN. R Typically, default PIN is "0000". Refer to the headset's operating instructions. 4 Press MOKN, then wait until a long beep sounds. 5 MOFFN R When is displayed on the base unit, the headset is available for use. Connecting/disconnecting a Bluetooth headset If you cannot connect the headset and base unit using the headset, you can connect using the unit. To use your headset with another Bluetooth device such as a cellular phone, you may need to disconnect it from the base unit. Important: R Make sure that the headset is turned on. Handset / Base unit 1 To connect/disconnect: MMENUN#622 R A long beep sounds. 2 Proceed with the operation for your unit. Handset: MOFFN Base unit: MEXITN Unpairing a Bluetooth headset You can cancel a pairing of the headset that is stored to the base unit. Handset 1 MMENUN#612 2 MbN: "Yes" a MSELECTN R When the headset is unpaired, the disappears from the base unit display. 3 MOFFN For assistance, please visit http://shop.panasonic.com/support 63 TGF57xUSA(en)_1201_ver031.pdf 63 1/12/2016 6:41:07 PM
![](/manual_guide/products/panasonic-kxtg785sk-operating-instructions-21a905f/63.png)