Panasonic KX-TG785SK Operating Instructions - Page 77

Menu list, Battery recharge, Problem, Cause/solution, For assistance, please visit

Page 77 highlights

Useful Information Problem I cannot connect a cellular phone to the base unit. I cannot hear a dial tone. The base unit beeps. Cause/solution R Confirm that your cellular phone is turned on. R Confirm that your cellular phone is within base unit range (page 16). R Your cellular phone's Bluetooth feature is turned off. Turn it on. R Depending on the state of the wireless environment, such as the presence of any electrical interference, there may be a delay even if the auto connection feature is turned on. You can connect to the base unit manually (page 21). R The cellular phone has not been paired to the base unit. Pair the cellular phone (page 19). R If your cellular phone is already connected to another Bluetooth device such as a Bluetooth headset or other Panasonic DECT phone, disconnect the device, then perform the connecting procedure to the base unit. R If your cellular phone is already registered on another Panasonic DECT phone, this function will not work properly. We strongly recommend that you remove the registration of this phone on both your cellular phone and on the other Panasonic DECT phone. R The base unit's AC adaptor or telephone line cord is not connected. Check the connections. R Disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your phone service provider. R New messages have been recorded. Listen to the new messages (page 66). Menu list Problem The display is in a language I cannot read. I cannot register a handset to a base unit. Cause/solution R Change the display language (page 17). R The maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit (page 55). Battery recharge Problem The handset beeps and/or flashes. Cause/solution R Battery charge is low. Fully charge the batteries (page 13). For assistance, please visit http://shop.panasonic.com/support 77 TGF57xUSA(en)_1201_ver031.pdf 77 1/12/2016 6:41:08 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

Problem
Cause/solution
I cannot connect a cellular
phone to the base unit.
R
Confirm that your cellular phone is turned on.
R
Confirm that your cellular phone is within base unit range
(page 16).
R
Your cellular phone’s Bluetooth feature is turned off. Turn
it on.
R
Depending on the state of the wireless environment, such
as the presence of any electrical interference, there may
be a delay even if the auto connection feature is turned
on. You can connect to the base unit manually (page 21).
R
The cellular phone has not been paired to the base unit.
Pair the cellular phone (page 19).
R
If your cellular phone is already connected to another
Bluetooth device such as a Bluetooth headset or other
Panasonic DECT phone, disconnect the device, then
perform the connecting procedure to the base unit.
R
If your cellular phone is already registered on another
Panasonic DECT phone, this function will not work
properly. We strongly recommend that you remove the
registration of this phone on both your cellular phone and
on the other Panasonic DECT phone.
I cannot hear a dial tone.
R
The base unit’s AC adaptor or telephone line cord is not
connected. Check the connections.
R
Disconnect the base unit from the telephone line and
connect the line to a known working telephone. If the
working telephone operates properly, contact our service
personnel to have the unit repaired. If the working
telephone does not operate properly, contact your phone
service provider.
The base unit beeps.
R
New messages have been recorded. Listen to the new
messages (page 66).
Menu list
Problem
Cause/solution
The display is in a language I
cannot read.
R
Change the display language (page 17).
I cannot register a handset to a
base unit.
R
The maximum number of handsets (6) is already
registered to the base unit. Cancel unused handset
registrations from the base unit (page 55).
Battery recharge
Problem
Cause/solution
The handset beeps and/or
flashes.
R
Battery charge is low. Fully charge the batteries (page 13).
For assistance, please visit http://shop.panasonic.com/support
77
Useful Information
TGF57xUSA(en)_1201_ver031.pdf
77
1/12/2016
6:41:08 PM