Panasonic KX-TGA405B Installation Guide - Page 4

TGA405(bundle)(e).fm Page 4 Thursday, February 4, 2010 10:12 AM Troubleshooting Problem Cause/solution The unit does not work. L When the indicators do not light, the AC adaptor is not connected properly. Check the connections. L When the indicators do not light green, move the unit closer to the base unit. L Registration may have been canceled. Deregister the unit, then re-register. Deregister: 1 Unplug the AC adaptor, then press and hold {PROGRAM}. 2 While pressing and holding {PROGRAM}, re-connect the AC adaptor. 3 Keep pressing and holding {PROGRAM} for about 10 seconds until the STATUS indicator flashes amber. Then release {PROGRAM}. Re-register: 1 Range extender: Unplug the AC adaptor. 2 Base unit: Press and hold {LOCATOR} for about 5 seconds until the registration tone sounds. - The next step must be completed within 90 seconds. 3 Range extender: Connect the AC adaptor, then wait until the STATUS indicator lights green. 4 Base unit: To stop the registration tone, press {LOCATOR}. While talking using the handset, sound cuts in and out. L The handset is out of range. Move the handset closer to this unit. The STATUS indicator continues to light amber for a while. L {PROGRAM} was pressed. The unit is in programming mode. To exit, press {PROGRAM} again. Do not press {PROGRAM}, except when deregistering the unit. - 4 -