Panasonic KX-TS108W Single-line Phone - Page 28

" Special Features Call Restriction You can prevent the unit from dialing phone numbers beginning with specified digit(s) (1 digit or 2 digits). Phone numbers with the restricted leading digits cannot be dialed out. To set the call restriction Make sure that a call is not put on hold. 1 Press (PROGRAM). 2 Press (MUTE). 3 Press (1). ≥If you use "1111" as a PIN code (factory set), the display on the right will be shown. There is no need to enter a PIN code. Go to step 6. ≥After the PIN code is changed, "- - - -" will be displayed. 4 Enter the PIN code (p. 26). (Ex. Your PIN code is "1234".) 5 Press (PROGRAM). ≥If a wrong PIN code is entered, 3 beeps will sound. Enter a correct PIN code and press (PROGRAM). ≥The current setting is displayed. (Ex. "67" is entered as the restricted digits.) 6 Enter the number(s) (1 digit or 2 digits) you want to restrict ((0) to (9)). (Ex. "12" is entered as the restricted digits.) ≥If you enter a wrong number, enter a correct number. ≥To change restricted digits from 2 digits to 1 digit, press ($) for 2 digits to change to "- -" and enter 1 digit. 7 Press (PROGRAM). ≥A long beep sounds. ≥The unit will return to the standby mode. ≥If your unit is connected to a PBX, this function may not operate. Contact your PBX supplier for more information. When dialing a phone number with the restricted leading digit(s), the dialed number will flash on the display, but not dialed out. 28