Panasonic KX-TS108W Single-line Phone - Page 7

Display - programming

Page 7 highlights

Preparation Display (This display shows all of the possible configurations.) : In the standby mode, the display shows the current time. (Ex. 12:00AM) : During a conversation, the call duration is displayed. (Ex. 2 hours, 14 minutes, 30 seconds) : (FLASH) was pressed. : (PAUSE) was pressed while storing phone numbers. : ($) was pressed while dialing. : (#) was pressed while dialing. : (AUTO/LOWER) was pressed (p. 18, 21). : (MUTE) was pressed during a conversation (p. 24). : The unit is in the clock setting mode (p. 12). : The unit is in the programming mode (p. 10). : The dial lock mode is set. To cancel the mode, see page 27. : This display flashes, when the battery power is low. To replace the batteries, see page 31. For assistance, please call: 1-800-211-PANA(7262) 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

For assistance, please call: 1-800-211-PANA(7262)
Preparation
7
Display
: In the standby mode, the display shows the current time.
(Ex. 12:00AM)
: During a conversation, the call duration is displayed.
(Ex. 2 hours, 14 minutes, 30 seconds)
:
(FLASH)
was pressed.
:
(PAUSE)
was pressed while storing phone numbers.
:
($)
was pressed while dialing.
:
(#)
was pressed while dialing.
:
(AUTO/LOWER)
was pressed (p. 18, 21).
:
(MUTE)
was pressed during a conversation (p. 24).
:
The unit is in the clock setting mode (p. 12).
:
The unit is in the programming mode (p. 10).
:
The dial lock mode is set. To cancel the mode, see page 27.
: This display flashes, when the battery power is low. To replace
the batteries, see page 31.
(This display shows all of the possible configurations.)