Panasonic KX-TS730S Conference Speakerphone - Page 21

Recording a conversation The total recording capacity is about 120 minutes. A maximum of 64 items can be recorded. L If 64 items have been recorded, conversation recording memory will become full even if the total recording time is less than 120 minutes. 1 Press {REC.} ({F1} key), while talking. L When recording starts, the remaining recording time will be displayed in minutes for about 3 seconds. "-2way recording-" will be displayed while recording. L If the remaining recording time is less than 6 minutes, the IN USE indicators will flash slowly in amber and green, and the remaining time will be displayed as shown below: Remaining time Display less than 6 minutes → Remaining:5min less than 5 minutes → Remaining:4min less than 4 minutes → Remaining:3min less than 3 minutes → Remaining:2min less than 2 minutes → Remaining:1min less than 1 minute*1 → Remaining:0min *1 When recording starts, the remaining recording time will be displayed in seconds for about 3 seconds. L If mute is on, the IN USE indicators flash in red. 2 To stop recording, press {STOP}. L If memory becomes full, " Memory full" will be displayed. To record additional conversations, erase unnecessary conversations. Using the AUDIO OUT jack AUDIO OUT jack L Conversations are also routed through the AUDIO OUT jack. This allows you to connect recording equipment (cassette recorder, computer, etc.) and record Recording a conversation conversations without using the unit's recording memory. L Recorded conversations are also routed through the AUDIO OUT jack during playback. L Connect "AUX IN" or "LINE IN" jack of recording equipment using an optional audio cable with a 3.5 mm mono plug. Many states have imposed regulations on the manner in which 2-way telephone conversations may be recorded, so you should inform the other party that the conversation is being recorded. Consult your telephone service provider for further information. L For Call Waiting service users If you receive a call during recording, perform the following to answer the 2nd call: - If you do not want to record the 2nd call, press {STOP}, then press {FLASH}. - If you want to record the 2nd call, press {FLASH}. The unit continues recording. Playing back a recorded conversation {} {#} (SKIP >) {0} (22) {STOP} {*} (< REPEAT) When conversations have been recorded, " " and the total number of recorded conversations are displayed while the unit is in standby mode. Press {PLAY} ({F1} key). #1 Play 00:00:01 < 22 > For assistance, please visit http://www.panasonic.com/consumersupport 21