Panasonic KX-TS730S Conference Speakerphone - Page 6

Preparation Connections 1 Interface box Interface cable To disconnect the interface cable, pull 2 out the cable while pushing the tabs. To power outlet (120 V AC, 60 Hz) AC adaptor Fasten the interface cable. Fasten the AC adaptor cord. Bottom of the interface box Hooks Telephone line cord To single-line telephone jack (RJ11C) Note: L Use only provided Panasonic AC adaptor PQLV10 (9V/850 mA) for proper product operation. In case of power outage, this product will not work. L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. If you subscribe to an DSL service L Please attach a noise filter (contact your DSL provider) to the telephone line between the interface box and the telephone line jack in the event of the following: - Noise is heard during conversations. To single-line - Caller ID features (page 14) do not telephone jack function properly. (RJ11C) Telephone line cord Noise filter (For DSL users) 6 For assistance, please visit http://www.panasonic.com/consumersupport