Panasonic KXTA308 Installation Manual - Page 168

S 3 Features Station Hunting Description If a called extension is busy, Station Hunting redirects the incoming call to an idle extension in the extension group. Idle extensions are automatically searched according to programming. Two hunting types are available as follows. Circular hunting: The extensions are searched one time in numerical order until an idle one is found. If all extensions are busy, a busy tone will be heard. If the calling outside (CO) line is assigned to DIL and all hunting group extensions are busy, the call will be forwarded within the group until an extension becomes idle. Terminate hunting: The extensions are searched from the destination jack until the call reaches the highest jack number in the group. If all higher number jacks are busy, the search will end and a busy tone will be heard. If the calling outside (CO) line is assigned to DIL and all hunting group extensions are busy, the call will be forwarded within the group until an extension becomes idle. One hunting type can be selected for each extension group. To leave the hunting group temporarily, use the Log-Out function. To rejoin, use the Log-In feature. Condition • If the called extension has set Do Not Disturb, Call Forwarding or Log-Out, Station Hunting will skip the extension. However, Station Hunting will not skip the extension which receives the call first, even if it has set Do Not Disturb or Call Forwarding. Programming References Section 4, System Programming [100] Hunting Group Set [101] Station Hunting Type [600] Extension Group Assignment Feature References Section 3, Features Call Forwarding Do Not Disturb Extension Group Log-In/Log-Out 3-112 Features