Panasonic KXTA308 Installation Manual - Page 313
[801] SMDR Parameter
View all Panasonic KXTA308 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 313 highlights
4.2 System Programming 801 SMDR Parameter Description Selection Default Programming Conditions Feature Reference Used to match the SMDR output to the paper size being used in the printer. The page length determines the number of lines per page. The skip perforation determines the number of lines to be skipped at the end of every page. • Page length (lines): 4 - 99 • Skip perforation (lines): 0 - 95 Page length - 66; Skip perforation - 0 1. Enter 801. Display: SMDR Parameter 2. Press NEXT to program the page length. Display example: Page Length:66 3. Enter the page length. To change the current entry, press CLEAR and enter the new page length. 4. Press STORE. 5. Press NEXT to program the skip perforation. Display example: Skip Perf: 0 6. Enter the skip perforation. To change the current entry, press CLEAR and enter the new skip perforation. 7. Press STORE. 8. Press END. • The page length should be at least four lines longer than the skip perforation length. • The title is placed on the first three lines of every page. • The programmed format becomes valid only if the Serial Interface (RS-232C) cable is connected. If a printer is already connected, disconnect it and connect again. Otherwise the previous format will be used. Section 3, Features Station Message Detail Recording (SMDR) System Programming 4-121