Panasonic KXTG2356 2.4 Ghz Dig.crdless.ans Sys. - Page 19
Initial setting, LCD contrast, Programmable Settings
View all Panasonic KXTG2356 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Preparation Programmable Settings Base unit ringer tone (use either the handset or the base unit) Base Unit Make sure the base unit is not being used. Press VOLUME [], then select the desired ringer tone by pressing [1] to [7]. [1] to [3] : Bell ringer patterns [4] to [7] : Melody patterns • After pressing VOLUME [], the base unit will ring using the current ringer tone. • The base unit will ring and the ringer tone will change. • To stop ringing, press [STOP]. Setting the base unit ringer tone by using the Handset 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press Select. 3 Scroll to "Set base unit" by pressing [d] or [B], then press Select. 4 Press Select at "Ringer tone". 5 Follow steps 4 and 5 of "Handset ringer tone" on page 18. • When selecting the ringer tone, the base unit will ring. If the base unit ringer volume has been turned off, the base unit will not ring (p. 18). LCD Contrast Handset There are 6 levels of LCD contrast. The factory preset is "level 3". 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press Select. 3 Scroll to "LCD contrast" by pressing [d] or [B], then press Select. 4 Select the desired contrast by pressing [d] or [B]. • The contrast will change. Initial setting KBack dB SelectL LCD contrast KBack dB SelectL Ex. Level 3 LCD contrast Low High KBack dB SaveL 5 Press Save, then press [OFF]. For assistance, please call: 1-800-211-PANA(7262) 19