Panasonic KXTG2356 2.4 Ghz Dig.crdless.ans Sys. - Page 67

If the Following Appear on Your Display... The following will be displayed when the unit needs your attention. Display message Cause & Remedy Recharge battery • The battery needs to be charged. Recharge the battery (p. 10). Charge for 6h • The battery has been discharged. The handset will not work. Fully charge the battery (p. 10). No link to base. Move closer to base, try again. • The handset has lost communication with the base unit. Walk closer to the base unit and try again or reregister the handset (p. 51). • Confirm the base unit's AC adaptor is plugged in. • Raise the base unit antenna. Please lift up and try again. • A handset button was pressed while the handset was on the base unit. Lift the handset and press the button again. Busy Error!! • The base unit is in use. Try again later. • When you tried to re-register the handset, the handset and base unit could not link for some reason, such as interference from electrical appliances. Move the handset and base unit away from any electrical appliances and try again. Phone book full • When you tried to store an item in the phone book, the phone book memory was full. Press [OFF] to exit the programming mode. To erase other items from the phone book, see page 42. System is busy. Please try again later. • The handset has lost communication with the base unit. Walk closer to the base unit and try again. • The Answering System is in use, such as answering a call or playing back messages. Try again later. Line in use • The base unit is conducting an outside call or a parallel connected telephone is in use. Line on hold • The base unit is on hold for an outside call. Useful Information For assistance, please call: 1-800-211-PANA(7262) 67