Panasonic LB80U Operating Instructions

Panasonic LB80U - XGA LCD Projector Manual

Get Panasonic LB80U - XGA LCD Projector PDF manuals and user guides
UPC - 791871111611
View all Panasonic LB80U manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic LB80U manual content summary:

  • Panasonic LB80U | Operating Instructions - Page 1
    Operating Instructions LCD Projector Commercial Use Model No. PT-LB80NTU PT-LB80U PT-LB78U PT-LB75NTU PT-LB75U Before operating this product, please read the instructions carefully and save this manual for future use. TQBJ0244-3 ENGLISH
  • Panasonic LB80U | Operating Instructions - Page 2
    Panasonic LCD projector. The serial number of your product may be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required. Model number: PT-LB80NTU / PT-LB80U / PT-LB78U / PT-LB75NTU / PT and maintenance (servicing) instructions in the
  • Panasonic LB80U | Operating Instructions - Page 3
    not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Model Number: PT-LB80NTU / PT-LB80U / PT-LB78U / PT-LB75NTU / PT-LB75U Trade Name: Panasonic Responsible party: Panasonic Corporation of North America Address: One Panasonic
  • Panasonic LB80U | Operating Instructions - Page 4
    Connect with other devices See "Connections" on page 17. 3. Prepare the Remote control See "Remote control" on page 14. 4. Start projecting See "Switching the projector on/off" on page 18. 5. Adjust the image See "Menu Navigation" on page 27. B When you start the projection for the first time, the
  • Panasonic LB80U | Operating Instructions - Page 5
    GUIDE 34 STARTUP LOGO 34 COMPUTER2 SELECT 34 RGB/YPBPR 34 WIDE MODE 34 LAMP POWER 35 LAMP 47 Specifications 48 Dimensions lampe 59 LAMP and TEMP Indicators 39 Managing the indicated problems 39 Care and Replacement 40 Cleaning the projector 40 Replacing the Lamp unit 41 Troubleshooting
  • Panasonic LB80U | Operating Instructions - Page 6
    Service Center for repairs. Do not attempt to repair the projector yourself, as this can be dangerous. Do not install this projector in a place which is not strong enough to take the full weight of the projector immediately when problem occurred. Do not place the projector on soft materials such as carpets
  • Panasonic LB80U | Operating Instructions - Page 7
    look into the lens. In addition, turn off the power and disconnect the power plug when you are away from the projector. When replacing the lamp, allow it to cool for at least one hour before handling it. The lamp cover gets very hot, and touching it can cause burns. Before replacing the
  • Panasonic LB80U | Operating Instructions - Page 8
    weight on this projector. You could fall or the projector lamp unit and check the inside of the projector. Ask an Authorized Service Center to clean inside the projector at least once a year. If dust is left to build up inside the projector without being cleaned out, it can result in fire or problems
  • Panasonic LB80U | Operating Instructions - Page 9
    an untrusted third party. Locking out or prevent anyone else from using the projector by an untrusted third party. Security instruction Change your password regularly. Do not use too simple password to guess. Any of Authorized Service Centers will never ask you for the password. Do not share your
  • Panasonic LB80U | Operating Instructions - Page 10
    with regard to safety Accessories Make sure the following accessories are provided with your projector. Remote control for PT-LB80NTU / LB75NTU (x1)*1 N2QAYB000260 Remote control for PT-LB80U / LB78U / LB75U (x1)*2 N2QAYB000262 AA batteries for Remote control (x2) Power cord secure lock
  • Panasonic LB80U | Operating Instructions - Page 11
    and projecting from front Setting on a desk/floor and projecting from rear Mounting in the ceiling and projecting from rear ALTITUDE If you use the projector at high elevation, the ALTITUDE setting need to be HIGH to set the fan speed high. Press I H to select the required option. If you need
  • Panasonic LB80U | Operating Instructions - Page 12
    (page 21) POWER indicator (page 21) LAMP indicator (page 39) TEMP indicator (page 39) Ambient Luminance Sensor (ALS) (page 30) Remote control signal receptor (page 23) RELEASE button Press to release the locked POWER button when turning on the projector. (page 19) POWER button Switch between
  • Panasonic LB80U | Operating Instructions - Page 13
    burglar prevention cable. Remote control signal receptor (page 23) Lamp unit compartment (page 41) About Your Projector Security lock Attach the commercial shackle lock, manufactured by Kensington, to protect your projector. Compatible with the Kensington MicroSaver Security System. Speaker Air
  • Panasonic LB80U | Operating Instructions - Page 14
    Projector Remote control POWER button Switch between stand-by mode and projection mode. (page 19/page 20) The PAGE buttons are only for PT-LB80NTU/ PT- attempt to modify or disassemble the remote control. Contact an Authorized Service Center for repairs. • Do not keep pressing the remote control
  • Panasonic LB80U | Operating Instructions - Page 15
    Projection size (4 : 3) Throw distance (L) PT-LB80NTU / LB80U Throw distance (L) PT-LB78U / LB75NTU / LB75U Screen diagonal Minimum not use the projector at a raised or a horizontally tilted position as it may cause malfunction of the projector. • You can tilt the projector body approximately ±
  • Panasonic LB80U | Operating Instructions - Page 16
    projecting from rear INSTALLATION: FRONT/CEILING INSTALLATION: REAR/CEILING NOTE: • A translucent screen is required for rear projection. • When mounting the projector in the ceiling, the optional ceiling mount bracket (ET-PKB80) is required. Front leg adjusters and throwing angle You can adjust
  • Panasonic LB80U | Operating Instructions - Page 17
    instructions of each peripheral device. The peripheral devices must be turned off. One RGB cable is provided with the projector. If necessary, prepare commercial connecting cables that match with the projector the audio connection manually. Connecting example: PT-LB80NTU/PT-LB75NTU only) ENGLISH - 17
  • Panasonic LB80U | Operating Instructions - Page 18
    guide rail of the AC IN terminal of the projector and slide it in. Rail guide Latch 3. Slide the power cord secure lock up along the side guide rail and remove. Rail guide wall outlet or by switching off the main power. The internal lamp cooling fan keeps operating by the internal power supply, and
  • Panasonic LB80U | Operating Instructions - Page 19
    small rattling or tinkling sound may be heard, or the display may flicker for the characteristics of the lamp. Those are normal and will not affect the performance of the projector. • When the internal cooling fan is operating, some, operational sound may be heard. The loudness of the operational
  • Panasonic LB80U | Operating Instructions - Page 20
    off and return to the projection. 2. Press the POWER button again in 10 seconds. 3. The POWER indicator will flash in orange. The projector is cooling the lamp. 4. The POWER and POWER LOCK indicator switch to red. J By remote control operation 1. Press the POWER button. The confirmation screen will
  • Panasonic LB80U | Operating Instructions - Page 21
    -LB80NTU/PT-LB75NTU only) The power is on and preparing for projection. Projecting. Orange Lit Flashing No power supply and the internal fan is cooling the lamp by internal power supply. The power is switched on again while cooling the lamp and recovering to the projection mode. Recovery may take
  • Panasonic LB80U | Operating Instructions - Page 22
    effect with the TEST PATTERN in OPTION menu. See "TEST PATTERN" on page 36. Focus ring Zoom ring Screen 2. Adjust the vertical angle of the projector. Press the front leg adjuster buttons and adjust the vertical angle. See "Front leg adjusters and throwing angle" on page 16. 3. Open the Zoom-Focus
  • Panasonic LB80U | Operating Instructions - Page 23
    OPTION menu is set to BUTTON, press the AUTO SETUP button. The projector will detect a RGB signal by SIGNAL SEARCH system and adjust the setting If SIGNAL SEARCH setting in OPTION menu is set to OFF, select the required signal manually first. See "Switching the input signal" on page 24. • If the dot
  • Panasonic LB80U | Operating Instructions - Page 24
    the input method manually by pressing the COMPUTER, WIRELESS (PT-LB80NTU/PT-LB75NTU only) guide on the upper right of the screen. Highlighted in yellow is selected terminal. See "INPUT GUIDE the projector COMPUTER1 WIRELESS*1 COMPUTER2 S-VIDEO VIDEO *1. WIRELESS is only for PT-LB80NTU/PT-LB75NTU.
  • Panasonic LB80U | Operating Instructions - Page 25
    Basic Operation Remote control operation Projecting an image in INDEX-WINDOW mode You can project an image split in 2 windows as an INDEX-WINDOW. One is frozen and stored in memory, and displayed on the screen's left side while displaying subsequent image continues on the right. Press the MENU or
  • Panasonic LB80U | Operating Instructions - Page 26
    Remote control operation Enlarging the centered area You can enlarge the projected image down to a centered area for emphasizing within the range of 1x to 2x. Q Shifting the center point Press F G I H to shift the center point. Q Enlarging the image 1. Press any side of the DIGITAL ZOOM +/-
  • Panasonic LB80U | Operating Instructions - Page 27
    Menu Navigation The menu system allows you to access functions which do not have their own dedicated buttons on the remote control. The menu options are structured and categorized. You can navigate through the menu with F G H I buttons. Navigating through the MENU J Displaying the main menu Press
  • Panasonic LB80U | Operating Instructions - Page 28
    Menu Navigation Main menu and Sub-menu The main menu has 6 options. Select the required menu item and press ENTER to display the sub-menu. Underlined items are factory default settings. NOTE: • Some default settings vary by the selected input signal. • sub-menu items vary according to the selected
  • Panasonic LB80U | Operating Instructions - Page 29
    GUIDE DETAILED SIMPLE OFF STARTUP LOGO ON OFF USER COMPUTER2 SELECT INPUT OUTPUT RGB/YPBPR AUTO RGB YPBPR WIDE MODE OFF ON LAMP POWER STANDARD ECO-MODE LAMP page 37 page 37 page 37 page 37 WIRELESS (PT-LB80NTU/PT-LB75NTU only) NETWORK NAME CHANGE INPUT PASSWORD PASSWORD CHANGE
  • Panasonic LB80U | Operating Instructions - Page 30
    fail to block out sunlight. AUTO: Automatic adjustment ON: Active OFF: Deactive NOTE: • Do not cover the Ambient Luminance Sensor (ALS) of the projector. See "Ambient Luminance Sensor (ALS)" on page 12. • AUTO is not available when INSTALLATION setting in OPTION menu is set to REAR/DESK or
  • Panasonic LB80U | Operating Instructions - Page 31
    . J For S-VIDEO/VIDEO signals Q TV-SYSTEM When the video signal is changed, the setting switches automatically. You can switch the setting manually to match the video data. Press I H to cycle through the options. AUTO NTSC NTSC 4.43 PAL SECAM PAL-N PAL-M NOTE: • AUTO setting will select from
  • Panasonic LB80U | Operating Instructions - Page 32
    "Main menu and Sub-menu" on page 28. REALTIME KEYSTONE If the projector is aligned non-perpendicularly to the screen, or if the projection screen has when the REALTIME KEYSTONE is activated, you can correct the keystone manually. Image Operation NOTE: • If the projecting signal's dot clock
  • Panasonic LB80U | Operating Instructions - Page 33
    POSITION menu Q 16:9 The squeezed signal will be projected in 16:9 ratio. Q THROUGH The image will be projected without any size adjustment. Q S4:3 The input signal will be sized down 75 % and projected. S4:3 mode is effective when projecting 4:3 image on to a 16:9 screen. Q AUTO The signal
  • Panasonic LB80U | Operating Instructions - Page 34
    and Sub-menu" on page 28. INPUT GUIDE When you change the input method, the guidance OUTPUT COMPUTER1 OUT RGB/YPBPR The projector will detect the signal from the selected correctly with AUTO setting, select RGB or YPBPR manually. WIDE MODE When projecting WIDE signals, switch to ON
  • Panasonic LB80U | Operating Instructions - Page 35
    RUNTIME is a relevant matter for lamp replacement timing. See "Replacing the Lamp unit" on page 41. • When the lamp unit is replaced with the new unit, the setting need to be reset to "0". POWER OFF TIMER You can set the off timer to switch off the power of the projector after a certain period of
  • Panasonic LB80U | Operating Instructions - Page 36
    can reset all of the customized settings to the factory defaults except WIRELESS and LAMP RUNTIME menu settings. 1. Press the ENTER button 2. Turn off the projector by pressing the POWER button. 3. Reset the projector by unplugging and plugging the power cord from the wall outlet.. 4. The minimum
  • Panasonic LB80U | Operating Instructions - Page 37
    SECURITY menu Remote control Control panel PASSWORD CHANGE MENU RETURN See "Navigating through the MENU" on page 27. See "Main menu and Sub-menu" on page 28. J Entering the SECURITY menu Every time when you apply to the SECURITY menu, you will be asked to perform the password operation.
  • Panasonic LB80U | Operating Instructions - Page 38
    Sub-menu" on page 28. NOTE: • The WIRELESS menu is available only with PT-LB80NTU/PT-LB75NTU. • See the wireless connecting information in the contents of the CD-ROM which is provided with the projector. • When INPUT PASSWORD in SECURITY menu is activated, performe the correct password operation to
  • Panasonic LB80U | Operating Instructions - Page 39
    the cause of the problem by status of the LAMP and/or TEMP indicators. 3. Follow the instruction for each indication below and solve the problem. 4. Turn on the projector in the correct way and confirm the indicator is not indicating a problem any longer. LAMP TEMP NOTE: • If no problem is found or
  • Panasonic LB80U | Operating Instructions - Page 40
    a cloth with water, wring the cloth well and then wipe the projector. Dry off the projector with dry cloth. Do not use petroleum benzine, thinner, any alcoholic replacing lamp unit. A replacement air filter is provided with a replacement lamp unit (ET-LAB80). Contact an Authorized Service Center
  • Panasonic LB80U | Operating Instructions - Page 41
    instructions which is provided with the lamp unit. • Do not use a lamp unit over 3 000 hours. Failure to observe this may result in explosion of the lamp. J Before replacing the lamp unit Contact an Authorized Service Center to purchase a replacement lamp unit (ET-LAB80). Switch off the projector
  • Panasonic LB80U | Operating Instructions - Page 42
    screws on the back of the projector until the screws turn freely, and remove the lamp unit cover. Lamp unit cover 3. Pull the used lamp unit gently from the projector. Grip the handle and keep the lamp unit paralleled when you remove the lamp. Some parts of the lamp unit are sharpened and may cause
  • Panasonic LB80U | Operating Instructions - Page 43
    Troubleshooting Should any problem persist, contact your dealer. Problem Cause Power does not turn on. No picture appears. The picture is fuzzy. The color is pale or grayish. No sound can be heard from the internal speaker. The control buttons of the projector do not operate. The Remote control
  • Panasonic LB80U | Operating Instructions - Page 44
    -N/SECAM 525i (480i) 625i (576i) 525p (480p) 625p (576p) 1 125 (1 080)/60i 1 125 (1 080)/50i 750 (720)/60p 750 (720)/50p VESA VGA SVGA MAC XGA MXGA MAC MSXGA SXGA SXGA60+ UXGA WIDE750 (720) WXGA768 WXGA800 WXGA+ WSXGA+ WUXGA 720 x 480i 15.7 59.9 720 x 576i 15.6 50.0 720 x 480i 15.7 59
  • Panasonic LB80U | Operating Instructions - Page 45
    the connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal ETX. You can add the required parameter. The projector can not receive any command for 10 seconds after the lamp is switched on. Wait 10 seconds before sending
  • Panasonic LB80U | Operating Instructions - Page 46
    = COMPUTER2 NWP = WIRELESS (PT-LB80NTU/PT-LB75NTU only) Call back 0 = Standby 1 = Lamp on control active 2 = Lamp on 3 = Lamp off control active Turning off the while the INPUT GUIDE is set to DETAILED, the computer connection guidance will be displayed. Manufacturer Panasonic NEC Key command
  • Panasonic LB80U | Operating Instructions - Page 47
    Technical Information Screen size and throw distance for 16:9 aspect ratio Projection size (16 : 9) Throw distance (L) PT-LB80NTU / LB80U Throw distance (L) PT-LB78U / LB75NTU / LB75U Screen diagonal Minimum distance Maximum distance Minimum distance Maximum distance (SD) (LW) (LT) (LW) (
  • Panasonic LB80U | Operating Instructions - Page 48
    2x)/Manual focus F 1.6 - 1.9, f 18.8 mm - 22.6 mm (PT-LB80NTU / LB80U) F 1.7 - 1.9, f 18.5 mm - 22.2 mm (PT-LB78U / LB75NTU / LB75U) 8.5:1 fixed (PT-LB80NTU / LB80U) 5:1 fixed (PT-LB78U / LB75NTU / LB75U) (page 15) UHM lamp (220 W) 3 200 lm (PT-LB80NTU / LB80U) 3 000 lm (PT-LB78U) 2 600 lm (PT
  • Panasonic LB80U | Operating Instructions - Page 49
    jack (Stereo MINI) Monitor output/stereo compatible 0 V [rms] - 2.0 V [rms] (variable) SERIAL D-sub 9-pin RS-232C compatible Wireless LAN (PT-LB80NTU/ PT-LB75NTU only) Compatible Wireless channel Distance IEEE802.11b/IEEE802.11g (Wireless LAN standard protocol) IEEE802.11b/IEEE802.11g: 1 - 13
  • Panasonic LB80U | Operating Instructions - Page 50
    16" 5 9 88 - 11/32" 3 - 7/16" 2 - 1/8" 54.5 97 3 - 13/16" 3 - 15/32" 88.6 103.6 194.4 4 - 1/16" 7 - 5/8" Trademark acknowledgements VGA and XGA are trademarks of International Business Machines Corporation. S-VGA is a registered trademark of the Video Electronics Standards Association. HDMI, the
  • Panasonic LB80U | Operating Instructions - Page 51
    CD-ROM Accessories 10 Cleaning Air filter 40 Projector 40 CLOCK PHASE 32 CLOSED CAPTION SETTING 36 Remote control button 14 INITIALIZE ALL 36 INPUT GUIDE 34 INPUT PASSWORD 37 INPUT SELECT Control panel 32 L LAMP Indicator 12 Indicator status 39 LAMP POWER 35 LAMP RUNTIME 35, 42 Lamp unit
  • Panasonic LB80U | Operating Instructions - Page 52
    receptor 12, 13 Replacing Air filter 40 Lamp unit 41 RETURN Control panel button 12 Remote 37 SERIAL 13 Basic format 45 Cable specifications 46 Communication settings 45 Connection 45 Control 47 4:3 15 Throwing angle 16 TINT 30 Troubleshooting 43 TV-SYSTEM 31 V VARIABLE AUDIO OUT 13
  • Panasonic LB80U | Operating Instructions - Page 53
    de votre projecteur LCD Panasonic. Le numéro de série de votre produit se trouve sous le projecteur. Veuillez le noter dans l'espace ci-dessous prévu à cet effet et conserver cette notice en cas de maintenance requise. Numéro de modèle: PT-LB80NTU / PT-LB80U / PT-LB78U / PT-LB75NTU / PT-LB75U Num
  • Panasonic LB80U | Operating Instructions - Page 54
    est pas installé et utilisé conformément aux instructions fournies avec celuici, peut provoquer des interférences PT-LB80NTU / PT-LB80U / PT-LB78U / PT-LB75NTU / PT-LB75U Désignation commerciale:Panasonic Fabricant responsable: Panasonic Corporation of North America Adresse: One Panasonic
  • Panasonic LB80U | Operating Instructions - Page 55
    est installé au plafond. Si l'installation n'est pas faite correctement, cela peut entraîner des blessures ou des chocs électriques. Ne pas utiliser un support de montage au plafond qui n'est pas agréé. Ne pas manipuler le cordon d'alimentation avec les mains mouillées. Cela peut entraîner des chocs
  • Panasonic LB80U | Operating Instructions - Page 56
    contre des objets durs ou si on la laisse tomber et des blessures et des mauvais fonctionnements peuvent s'ensuivre. Avant de remplacer la lampe, veiller à débrancher la fiche du cordon d'alimentation de la prise de courant. Il y a risque d'électrocution ou d'explosion. Ne pas laisser des enfants ou
  • Panasonic LB80U | Operating Instructions - Page 57
    ce qui peut entraîner des dommages ou des blessures. Si la lampe s'est cassée, ventiler immédiatement la pièce. Ne pas toucher ni un médecin immédiatement. S'adresser au revendeur pour le remplacement de la lampe et l'inspection de l'intérieur du projecteur. Demander à un centre technique agr
  • Panasonic LB80U | Operating Instructions - Page 58
    ceci n'affecte pas le bon fonctionnement de votre LCD. Ce projecteur est équipé d'une lampe au mercure sous haute pression, dont les principales (pour éviter une telle situation, vous pouvez verrouiller le projecteur). Instructions de sécurité Modifiez fréquemment votre mot de passe. N'utilisez
  • Panasonic LB80U | Operating Instructions - Page 59
    ésentent en aucun cas des durées garanties. • Pour plus d'informations sur l'unité de lampe et la période de garantie, consulter les instructions fournies avec l'unité de lampe. • N'utilisez pas de lampe plus de 3 000 heures. Sinon la lampe pourrait exploser. J Avant de remplacer le l'unité de la
  • Panasonic LB80U | Operating Instructions - Page 60
    contient du verre. Si elle tombe ou qu'elle reçoit un choc, elle pourrait s'endommager ou éclater. Q Réinitialisation de DURÉE DE LA LAMPE 1. Brancher le cordon d'alimentation à une prise et mettre le projecteur sous tension. 2. Appuyer sur la touche MENU pour afficher le menu. 3. Appuyer sur
  • Panasonic LB80U | Operating Instructions - Page 61
  • Panasonic LB80U | Operating Instructions - Page 62
    NOTE: This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. Printed in Japan S0308-5039F(P) TQBJ0244-3
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
E
NGLISH
Operating Instructions
LCD Projector
Model No.
PT-LB80NTU
PT-LB80U
PT-LB78U
PT-LB75NTU
PT-LB75U
Before operating this product, please read the instructions carefully and save this manual for future use.
TQBJ0244-3
Commercial Use