Panasonic MCGG773 MCGG773 User Guide - Page 32

Lift Agitator Up Soulever l'agitateur Unidad del agitador Motor Shaft Arbre d'entraînement du moteur Eje del motor Agitator Agitateur Agitador Replacing Belt ➢ Replace belt whenever a burning rubber smell caused by excessive belt slippage occurs. ➢ Remove lower plate. See: "Removing and Installing Lower Plate" ➢ Remove agitator by carefully lifting out. ➢ Remove worn or broken belt. ➢ Clean agitator. See: "Cleaning Agitator" ➢ Loop new belt (Panasonic Type UB8 only) around motor shaft and agitator pulley; see illustration for correct belt routing. End Cap Bouchon Tapa de extremo Groove Ouverture Ranura Groove Ouverture Ranura ➢ Reinstall agitator back into nozzle housing grooves. ➢ After reinstalling the agitator, turn it by hand to make sure the belt is not twisted or pinched and that all rotating parts turn freely. ➢ Reinstall lower plate. See: "Removing and Installing Lower Plate" - 32 -