Panasonic MCGG773 MCGG773 User Guide - Page 34
Agitator Assembly, Replacing Brushes, Split pin, Agitator, Pulley, Shaft, End Cap, Holder, Brushes
View all Panasonic MCGG773 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Agitator Assembly End Cap Brush Brushes Spacers (3) Agitator Holder Agitator tube Washer (optional) Nut Split pin Shaft Agitator Pulley End Cap Replacing Brushes Nut Noix Tuerca Belt Pulley Poulie de la courroie Polea para Agitator Holder correa Support de l'agitateur Soporte del agitador Push Off Pousser Empuje hacia fuera Brush Brosse Cepillo ➢ When the bristles on the agitator are worn so that they do not touch a card held across the lower plate, the brushes should be replaced. ➢ Remove lower plate and agitator. ➢ Remove the nut from agitator shaft and end cap. ➢ Do not bend agitator shaft or lose nut or washer. ➢ Pull agitator shaft out of agitator body. ➢ Pull, or pry out, agitator holder and agitator pulley. ➢ Push each brush out of agitator body as shown. ➢ Install new brushes by reversing procedure. ➢ Reinstall agitator holder and agitator pulley completely. ➢ Reinstall the agitator shaft, washer, end cap and nut. ➢ See exploded view for correct assembly of parts. ➢ Position belt over agitator pulley on the agitator. ➢ Reinstall agitator and lower plate. - 34 -