Panasonic MCV5261-MUL MCV5261 User Guide - Page 30
Cleaning Agitator, End Cap
View all Panasonic MCV5261-MUL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Replacing Belt + + + Groove Ouverture Ranura End Cap Bouchon Tapa del extremo ➢ Reinstall agitator back into nozzle housing grooves. ➢ Close rear belt cover and reinstall felt packing. ➢ After reinstalling the agitator, turn it by hand to make sure that belt is not twisted or pinched and that all rotating parts turn freely. ➢ Reinstall lower plate. Cleaning Agitator ➢ Clean agitator after every five uses and every time the belt is replaced. ➢ Remove lower plate. ➢ Cut off any carpet pile and lint entangled around agitator with a pair of scissors. ➢ Remove agitator. ➢ Remove any string or debris located on the end caps, washers or agitator shaft. ➢ Reinstall agitator and lower plate. - 30 -
- 30 -
Reinstall agitator back into nozzle
housing grooves.
Close rear belt cover and reinstall felt
packing.
After reinstalling the agitator, turn it
by hand to make sure that belt is not
twisted or pinched and that all
rotating parts turn freely.
Reinstall lower plate.
Replacing Belt
+
+
+
End Cap
Tapa del extremo
Bouchon
Groove
Ranura
Ouverture
Cleaning Agitator
Clean agitator after every five uses
and every time the belt is replaced
.
Remove lower plate
.
Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors
.
Remove agitator
.
Remove any string or debris located
on the end caps, washers or agitator
shaft
.
Reinstall agitator and lower plate
.