Panasonic MW10 Multi-media Audio System - Page 12

Listening to an iPod Shuffle (only for music) Tracks or albums are played at random. Repeat Normal/Shuffle playback can be repeated. Press [PLAY MODE]. Each time you press Songs ˆ Albums ˆ Off Press [REPEAT]. Each time you press One ˆ All ˆ Off Note • For the album shuffle, the tracks in the album are played back in the proper order. • If video is played back, the Shuffle setting may become "OFF". • When a play mode is switched, the track list display on the audio playback screen may be different from the tracks played back. If this occurs, select tracks from the track selection menu again. „ If the iPod with Shuffle/Repeat set is attached to this unit: Playback is performed with the same playback method. Also, even if the iPod is removed after the playback method is set on this unit, the iPod still keeps the same playback method. "Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. Listening to the radio Adjust the frequency to listen (Manual Tuning) 1. Press [FM] or [AM]. • For the main unit, press [AUDIO SELECTOR] to select "FM" or "AM". 2. Press [PLAY MODE] to select "Manual Tuning". 3. Press [u/t, y/i] to tune in the station you like. A Lights up when signals are received. B Lights up when the FM stereo broadcast is received. A FM 88.1 MHz Manual Stereo B Automatic tuning Stopping the radio sound Press and hold [u/t, y/i] until the frequency indicator starts to run. • Stops when the broadcast is received. • If jamming is present in the surroundings during the automatic tuning, the broadcast may not be received and the frequency may stop. • To stop the automatic tuning, press [u/t, y/i] again. [g] To listen to the radio again, press [FM] or [AM]. (For the main unit, press [AUDIO SELECTOR].) „ FM frequency step The step is factory-set to 200 kHz, but you can change it to receive broadcasts allocated to 100 kHz steps. 1. Press [FM]. 2. Press [PROGRAM]. 3. Press [e, r] to select the "Frequency Step" and press [OK]. 4. Press [e, r] to select the "100 kHz" or "200 kHz" and press [OK]. RQT9522 12