Panasonic NN-CS89 Owners Manual - Page 61

Before Requesting Service (continued) See below before calling for service, as most problems can easily be remedied by following these simple solutions: Problem Solution Oven will not turn on. Oven will not start cooking. The oven is not plugged in securely or needs to be reset; remove plug from outlet, wait ten seconds and re-insert. Main circuit breaker or main fuse is tripped or blown. Reset main circuit breaker or replace main fuse. There is a problem with the outlet; plug another appliance into the outlet to check if it is working. The door is not closed completely. Close the oven door securely. Start/Set was not touched after programming; Touch Start/Set. Another program is already entered into the oven; touch Stop/Reset to cancel the previous program and enter new program. The program is not correct; program again according to the Owner's manual. Stop/Reset has been touched accidentally; program oven again. The " " appears in the display window. The oven stops cooking and "SERVICE" appears in the display window. "HOT INSIDE WAIT" appears in the display window. "COOLING" appears in the display window. The CHILD SAFETY LOCK was activated by touching Start/Set three times; Deactivate CHILD SAFETY LOCK by touching Stop/Reset three times. The display indicates a problem with microwave generation system. Please contact an authorised Service Center (see next page). The cavity is overheated. Operate again after it cools down. Please open the door in order to cool the temperature of the cavity more quickly. The fan is operating to cool the electric components. The word "COOLING" will disappear after the fan stops. "DEMO MODE PRESS ANY KEY" or "D" The oven is under demonstration mode. Touch Microwave once, Start/Set appears in the display window. 4 times and Stop/Reset 4 times. "U14" appears in the display window only The water tank is empty. Full it with water and tap Stop/Reset to reset. The control panel keys do not respond when touched The oven may be in stand-by mode. Ensure the oven is plugged in. Open and close the door to activate White powder found at steam outlet, drip tray and oven cavity. The white powder is mineral crystal from evaporation of water, it is natural substance and harmless to human body. You can use auto cleaning menu with Auto Menu F1&F2 to clean the steam system and water supply pipes to improve condition. If crystal attached to the nozzle or in the oven cavity, please wipe and clean with a wring cloth. After using steam function or cleaning, pour out the water from the drip tray and wipe with a sponge. 61 '$+$1@&/@JOEE