Panasonic P2 Handheld Camcorder Advance Operating Instructions - Page 96
Contents of P2 card status display, settings, P2 Card Remaining Capacity/Total Capacity
View all Panasonic P2 Handheld Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Thumbnail operations (continued) Contents of P2 card status display settings From the thumbnail menu, select PROPERTY → CARD STATUS. The following screen appears. When "REMAIN" is selected: 1 2 3 5 4 1. Write-protect Mark The mark appears if the P2 card is writeprotected. 2. P2 Card Status (remaining free space) The remaining memory capacity of the P2 card is indicated by a bar graph and percentage. The bar graph indicator moves to the left as the remaining free space decreases. The following indications may appear, depending on the card status: FORMAT ERROR: An unformatted P2 card is inserted. NOT SUPPORTED: An unsupported card is inserted in the camerarecorder. NO CARD: P2 cards are not inserted. You can also check information particular to a certain clip, such as the serial number or user ID. Push the Operation lever in the direction to select the P2 card with the data you wish to view then press SET on the Operation lever to display detailed information for the P2 card. 3. P2 Card Remaining Capacity/Total Capacity Displays the P2 card remaining capacity and total capacity in minutes. The total of the remaining memory capacity for each P2 card that is displayed may not match the actual total remaining memory capacity for the P2 cards because only the figure in minute is displayed. During native recording with VFR, this changes depending on the frame rate. 4. Total remaining free space for the slot Displays the total remaining free space for all 2 slots. Please note that the remaining capacity of a writeprotected P2 card is not included in the total remaining capacity. When REC FUNCTION is set to LOOP, the slot total indicates the standard recording time for loop recording. However, when PROPERTY SETUP → USED is selected, the used space of the slot total is greater than that actually used, and is less than that actually used when PROPERTY SETUP → REMAIN is selected. 5. Warning symbol When the following P2 card is detected, the symbol is displayed. RUN DOWN CARD: The maximum number of overwrites on the P2 card has been exceeded. DIR ENTRY NG CARD: The directory structure on the P2 card is not supported. The warning can be confirmed on the P2 card detailed information indication in "2. P2 Card Status (remaining free space)" (Page 96). 96